Understanding the effect of synthesis and sintering temperature on the functional properties of barium titanate/cobalt ferrite composites
Објеката
- Тип
- Рад у часопису
- Верзија рада
- објављена верзија
- Језик
- енглески
- Креатор
- Marija Šuljagić, Aleksandar Kremenović, Ivan Petronijević, Adis Džunuzović, Miljana Mirković, Vladimir Pavlović, Ljubica Anđelković
- Извор
- Science of Sintering
- Датум издавања
- 2023
- Сажетак
- To investigate the effect of synthesis procedure and sintering temperature on the functional properties of perovskite/spinel ceramics, BaTiO3/CoFe2O4 composites were prepared by thermal decomposition, coprecipitation, and microemulsion method, and sintered at 1150°C and 1300°C. The phase composition and morphology of as-prepared powders as well as sintered ceramics were thoroughly examined by X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS). The dielectric and ferroelectric measurements were performed in detail. Generally, the samples sintered at 1300°C had better performances than those sintered at 1150°C. The composite synthesized by thermal decomposition and sintered at 1300 °C stands out among other prepared BaTiO3/CoFe2O4 ceramics, owing to high stability in the wide frequency range and low leakage currents. The obtained results indicate that such composite might be successfully applied as a functional multiferroic.
- том
- 55
- Број
- 3
- почетак странице
- 367
- крај странице
- 381
- број страница
- 15
- doi
- 10.2298/SOS220512013S
- issn
- 0350-820X
- Subject
- Perovskite/spinel ceramics, Multiferroic, Sintering, Influence of synthesis method
- Шира категорија рада
- M20
- Ужа категорија рада
- М22
- Права
- Затворени приступ
- Лиценца
- All rights reserved
- Формат
Marija Šuljagić, Aleksandar Kremenović, Ivan Petronijević, Adis Džunuzović, Miljana Mirković, Vladimir Pavlović, Ljubica Anđelković. "Understanding the effect of synthesis and sintering temperature on the functional properties of barium titanate/cobalt ferrite composites" in Science of Sintering (2023). https://doi.org/10.2298/SOS220512013S
This item was submitted on 15. октобар 2023. by [anonymous user] using the form “Рад у часопису” on the site “Радови”: http://gabp-dl.rgf.rs/s/repo
Click here to view the collected data.