Претрага
2348 items
-
Overwiew of In-Pit Crushing & Conveying Technology in Open Pit Mines
The conditions under which contemporary surface mining operations is carried out obviously becoming increasingly complex. In such complex conditions, the optimization of haulage systems as the technological phase with the largest share in the total operating costs, is very important from the aspect of achieving profitability of the mining project. In a large number of cases, the application of traditional haulage systems with trucks (as the most dominant type of haulage in open pit mines) does not lead to ...Ali Nasirinezhad, Dejan Stevanović, Dragan Ignjatović, Petar Marković. "Overwiew of In-Pit Crushing & Conveying Technology in Open Pit Mines" in 8th International Conference MIining And Environmental Protection, Sokobanja, 22-25 September 2021, University of Belgrade, Faculty of Mining and Geology, Belgrade, Serbia (2021)
-
Determining the Availability of Continuous Systems at Open Pits Applying Fuzzy Logic
This work presents a model for determining the availability of continuous systems at open pits by applying fuzzy logic and fuzzy inference systems. The applied model was formed by the synthesis of independent partial indicators of availability. The model is based on an expert system for assessing the availability of continuous mining systems. The availability of the system, as a complex state parameter, is decomposed into the partial indicators, reliability, and convenience of maintenance, and the fuzzy compositions, used ...системи, континуални систем експоатације, површински коп, рударство, расположивост, фази логика, max–min композиција, min–max композицијаMiljan Gomilanović, Miloš Tanasijević, Saša Stepanović. "Determining the Availability of Continuous Systems at Open Pits Applying Fuzzy Logic" in Energies, MDPI AG (2022). https://doi.org/10.3390/en15186786
-
A Model for Determining Fuzzy Evaluations of Partial Indicators of Availability for High-Capacity Continuous Systems at Coal Open Pits Using a Neuro-Fuzzy Inference System
This paper presents a model for determining fuzzy evaluations of partial indicators of the availability of continuous systems at coal open pits using a neuro-fuzzy inference system. The system itself is a combination of fuzzy logic and artificial neural networks. The system availability is divided into partial indicators. By combining the fuzzy logic and artificial neural networks, a model is obtained that has the ability to learn and uses expert judgment for that learning. This paper deals with the ...системи, континуални системи експлоатације (роторни багер-транспортер-дробилично постројење), рударство, расположивост, меко рачунарство, фази логика, ANN, ANFISMiljan Gomilanović, Miloš Tanasijević, Saša Stepanović, Filip Miletić. "A Model for Determining Fuzzy Evaluations of Partial Indicators of Availability for High-Capacity Continuous Systems at Coal Open Pits Using a Neuro-Fuzzy Inference System" in Energies, MDPI AG (2023). https://doi.org/10.3390/en16072958
-
A Model for Determining the Dependability of Continuous Subsystems in Coal Mines Using the Fuzzy Logic Approach
Nikola Stanić, Miljan Gomilanović, Petar Marković, Daniel Krzanović, Aleksandar Doderović, Saša Stepanović (2024)This study presents a unique model for assessing the dependability of continuous parts of combined systems in open-pit mining through the application of fuzzy logic. Continuous sub-systems as part of the combined system of coal exploitation in surface mines have the basic function of ensuring safe operation, high capacity with high reliability, and low costs. These subsystems are usually part of the thermal power plant’s coal supply system and ensure stable fuel supply. The model integrates various independent partial ...fuzzy logic, max-min composition, continuous part of combined system (CCS), open pit, mining, dependabilityNikola Stanić, Miljan Gomilanović, Petar Marković, Daniel Krzanović, Aleksandar Doderović, Saša Stepanović. "A Model for Determining the Dependability of Continuous Subsystems in Coal Mines Using the Fuzzy Logic Approach" in Applied Sciences, Basel, August 2024, MDPI (2024). https://doi.org/https://doi.org/10.3390/app14177947
-
Split-Desktop software for the analysis of fragment size distribution of blasted rock mass
Milanka Negovanović, Lazar Kričak, Stefan Milanović, Jovan Marković, Nikola Simić, Snežana Ignjatović (2023)Drobljenje stena je najvažniji pokazatelj u proceni efekata miniranja pri proizvodnom miniranju u površinskoj eksploataciji. Stepen drobljenja stena ima veliki uticaj na efikasnost daljih operacija utovara, transporta, drobljenja i mlevenja. Optimalno drobljenje stena pri proizvodnom miniranju utiče na smanjenje ukupnih troškova proizvodnje. Stoga je pouzdana procena veličine drobljenja odminirane stenske mase veoma važno pitanje, ne samo u operacijama miniranja, već i u rudarskoj proizvodnji. Za predviđanje distribucije veličine komada odminirane stenske mase postoje različiti empirijski modeli. KUZ-RAM model omogućava ...Milanka Negovanović, Lazar Kričak, Stefan Milanović, Jovan Marković, Nikola Simić, Snežana Ignjatović. "Split-Desktop software for the analysis of fragment size distribution of blasted rock mass" in 9th International Conference Mining and environmental protection, Sokobanja, Serbia, 24 – 27. May 2023, Belgrade : University of Belgrade, Faculty of Mining and Geology (2023)
-
Fuzzy Model for Risk Assessment of Machinery Failures
The main goal of this research was the development of an algorithm for the implementation of negative risk parameters in a synthesis model for a risk level assessment for a specific machine used in the mining industry. Fuzzy sets and fuzzy logic theory, in combination with statistical methods, were applied to analyze the time picture state of the observed machine. Fuzzy logic is presented through fuzzy proposition and a fuzzy composition module. Using these tools, the symmetric position of the ...... secondary mobile crushing machine “METSO MINERALS”, type “Lokotrack LT 1213S”, which is used in the open pit “Ladne vode”, near Petrovac na Mlavi, Serbia. The results indicated that there are numerous high-risk potential failures. These risks are influenced by low investment in human and financial resources ...
... to respond quickly and effectively to failures. The assessments of the failure risk level for individual elements, subsystems, and the technical system of the crushing machine as a whole indicated that it is necessary to design a detailed plan and strategy for timely action in terms of machinery ...
... data in a risk assessment model. The proposed risk assessment model, using fuzzy logic conclusions and min–max composition, was used on a mobile crushing machine. The results indicated that the risk level of the mobile crushing machine was in the “high” category, which means that it is necessary ...Dejan V. Petrović, Miloš Tanasijević, Saša Stojadinović, Jelena Ivaz, Pavle Stojković. "Fuzzy Model for Risk Assessment of Machinery Failures" in Symmetry, MDPI AG (2020). https://doi.org/10.3390/sym12040525
-
Development of an integrated model for open-pit-mine discontinuous haulage system optimization
Miodrag Čelebić, Dragoljub Bajić, Sanja Bajić, Mirjana Banković, Duško Torbica, Aleksej Milošević , Dejan Stevanović (2024)Miodrag Čelebić, Dragoljub Bajić, Sanja Bajić, Mirjana Banković, Duško Torbica, Aleksej Milošević , Dejan Stevanović . "Development of an integrated model for open-pit-mine discontinuous haulage system optimization" in Sustainability, MDPI (2024). https://doi.org/10.3390/su16083156
-
Towards a Mining Equipment Ontology
... are excavation speed and slewing speed. The class Oprema is used for modeling all types of specific equipment (excavation machinery, conveying and auxiliary machinery, pumps etc.). Data on exploitation areas, open pit or work bench are modeled by the class Područje. The open pit, that is, the area where ...
... users, open pits, excavation machinery and conveying mechanization and technological systems is realized within the SukuMine library. The SukuTM library contains classes for exploitation planning, whereas classes pertaining to work force and work safety can be found in the SukuSezar library. As for RudOnto ...
... ical resources in electronic format, preferably including relations of a semantic nature between terms. The simplest semantic relations are those between general and specific terms, such as coal mine, and open pit, as a specific type of coal mines. Such semantic relations result in hierarchies among ...Ranka Stanković, Ivan Obradović, Olivera Kitanović, Ljiljana Kolonja. "Towards a Mining Equipment Ontology" in Proceedings of the 12th International Conference Research and Development in Mechanical Industry, RaDMI 2012, September 2012, Vrnjačka Banja, Serbia no. 1, Vrnjačka Banja, Serbia : SaTCIP (Scientific and Technical Center for Intellectual Property) Ltd. (2012)
-
Approach to operational mine planning: Case study Tamnava West
... production planning. In this regard, pit limits, geometry of benches or technology, was not a part of interest for this study, and are simply as it is. 2.1.4. Design of pit benches Design of pit benches is one of the most important and critical phases in mine planning of pit production. It’s ...
... mining equipment. Coal and interburden is excavated with 4 ECC systems (Bucketwheel Excavator - Conveyors-Crushing Plant), and 2 ECS systems (Bucketwheel Excavator- Conveyors-Spreader) are engaged on overburden excavation. General technological scheme of open pit Tamnava West is presented ...
... quality control in Minex for the Tamnava West open pit, was based on 6 steps: - Preparation of data - Geological modeling - Ultimate pit design - Design of pit benches - Discretization of benches on mining blocks and cuts - Reporting 2.1.1. Preparation of data For the purpose of importing ...Dejan Stevanović, Mirjana Banković, Milica Pešić Georgiadis, Ranka Stanković. "Approach to operational mine planning: Case study Tamnava West" in Tehnika, Beograd : Savez inženjera i tehničara Srbije (2014). https://doi.org/10.5937/tehnika1406952S
-
Definition of criteria and alternatives for choosing the optimal mining method deposits when applying multi: Criteria optimization, Belgrade, June 2024
Sanja Bajić, Dragoljub Bajić, Branko Gluščević, Radmila Gaćina, Josip Išek. "Definition of criteria and alternatives for choosing the optimal mining method deposits when applying multi: Criteria optimization, Belgrade, June 2024" in Podzemni radovi, Beograd, jun 2024, Centre for Evaluation in Education and Science (CEON/CEES) (2024). https://doi.org/10.5937/podrad2444071B
-
Improving efficiency of thermal power plants through mine coal quality planning and control
Главни циљ контроле квалитета угља у рудницима лигнита је снабдевање термоелектрана угљем чији квалитет мора да се креће унутар одређених квалитативних ограничења. Карактеристике угља могу да утичу на ефикасност, поузданост и расположивост како котла тако и јединица за контролу емисије. У овом раду аутори су презентовали интегрисану симулацију рударског процеса као нови приступ у истраживању променљивости калоричне вредности угља приликом експлоатације комплексног лежишта лигнита. Резултати таквог приступа омогућавају драгоцен увид у перформансе континуалног рударског система у смислу контроле променљивости ...Mirjana Banković, Dejan Stevanović, Milica Pešić, Aleksandra Tomašević, Ljiljana Kolonja. "Improving efficiency of thermal power plants through mine coal quality planning and control" in Thermal Science, Vinča Institute of Nuclear Sciences (2018). https://doi.org/10.2298/TSCI170605209B
-
Accuracy assessment of geometrical elements for setting-out in horizontal plane of conveying chambers at the bauxite mine „Kosturi“ Srebrenica
Milutinović Aleksandar, Ganić Aleksandar, Tokalić Rade. "Accuracy assessment of geometrical elements for setting-out in horizontal plane of conveying chambers at the bauxite mine „Kosturi“ Srebrenica" in Archives of Mining Sciences 59 no. 1, Berlin, Germany: The Journal of Committee of Mining of Polish Academy of Sciences De Gruyter (2014): 93-106. https://doi.org/DOI 10.2478/amsc-2014-0007
-
Managing mining project documentation using human language technology
Purpose: This paper aims to develop a system, which would enable efficient management and exploitation of documentation in electronic form, related to mining projects, with information retrieval and information extraction (IE) features, using various language resources and natural language processing. Design/methodology/approach: The system is designed to integrate textual, lexical, semantic and terminological resources, enabling advanced document search and extraction of information. These resources are integrated with a set of Web services and applications, for different user profiles and use-cases. Findings: The ...Digital libraries, Information retrieval, Data mining, Human language technologies, Project documentationAleksandra Tomašević, Ranka Stanković, Miloš Utvić, Ivan Obradović, Božo Kolonja . "Managing mining project documentation using human language technology" in The Electronic Library (2018). https://doi.org/10.1108/EL-11-2017-0239
-
Characterization and Environmental Evaluation of Recycled Aggregates from Construction and Demolition Waste in Belgrade City Area (Serbia)
Filip Abramović, Miroslav Popović, Vladimir Simić, Vesna Matović, Radmila Šerović. "Characterization and Environmental Evaluation of Recycled Aggregates from Construction and Demolition Waste in Belgrade City Area (Serbia)" in Materials, MDPI AG (2024). https://doi.org/10.3390/ma17040820
-
Fuzzy expert analysis of the severity of mining machinery failure
Mining machinery failure is almost an everyday occurrence. Usually the failures bare certain consequences, which require additional financial costs to repair and restore the system to its operational state. The consequences are viewed through negative and damaging effects a failure has on the machine, health and safety of the employees, work environment, and on the environment. The removal of the consequences of the failure requires additional financial investment, which has a negative impact on the company’s business. In order ...Dejan V. Petrović, Miloš Tanasijević, Saša Stojadinović, Jelena Ivaz, Pavle Stojković. "Fuzzy expert analysis of the severity of mining machinery failure" in Applied Soft Computing, Elsevier BV (2020). https://doi.org/10.1016/j.asoc.2020.106459
-
Production information system of the Pljevlja coal mine
Božo Kolonja, Ranka Stanković, Filip Vuković . "Production information system of the Pljevlja coal mine" in Mine Planning and Equipment Selection 2000, Routledge (2018). https://doi.org/10.1201/9780203747124-154
-
Flyrock induced by blasting in surface mining
Milanka Negovanović, Lazar Kričak, Snežana Ignjatović, Stefan Milanović, Jovan Marković, Nikola Simić, Rade Šarac (2022)Miniranje predstavlja i dalje najefikasniji i najjeftiniji način eksploatacije velikih količina čvrstih mineralnih sirovina na površinskim kopovima. Energija eksplozije se koristi za fragmentaciju čvrste stenske mase do zahtevane granulacije. Pored pozitivnih efekata miniranja, postoje i određeni neželjeni efekti svakog procesa miniranja koji se mogu javiti, a to su: potresi tla, razletanje komada stene, vazdušni udari, otrovni i zagušljivi gasovi i prašina. Razletanje komada stene je nekontrolisano izbacivanje fragmenata odminirane stenske mase i predstavlja jedan od glavnih izvora materijalne štete ...Milanka Negovanović, Lazar Kričak, Snežana Ignjatović, Stefan Milanović, Jovan Marković, Nikola Simić, Rade Šarac. "Flyrock induced by blasting in surface mining" in Rudarski glasnik, Beograd : Rudarski institut (2022). https://doi.org/10.25075/BM.2022.05
-
Analiza seizmičkog dejstva eksplozije pri miniranju na primeru izrade tunela Golubac kod Golupca
Savremeno rudarstvo, a pogotovo masovna eksploatacija metaličnih ležišta, ne bi se mogla zamisliti bez primene eksploziva. Rudarstvo je privredna grana, gde su eksplozivi našli najširu primenu za eksploataciju čvrstih mineralnih sirovina. Primena energije eksploziva dovodi do poboljšanja tehničkoekonomskih pokazatelja pri eksploataciji mineralnih sirovina, ali i do pojave negativnih efekata koji prate radove na miniranju. Eksplozivni materijali u rudarstvu, geologiji i drugim delatnostima, svojim dejstvom narušavaju prirodnu sredinu u vidu drobljenja, razbacivanja komada stene, vazdušnih udara, pojave sezmičkih efekata, pojave ...Suzana Lutovac, Miloš Gligorić, Jelena Majstorović, Luka Crnogorac. "Analiza seizmičkog dejstva eksplozije pri miniranju na primeru izrade tunela Golubac kod Golupca" in XV Međunarodna konferencija OMC 2022, Zlatibor, 12-15. oktobar 2022., Jugoslovenski komitet za površinsku eksploataciju (2022)
-
Failure Estimation of the Majdanpek Open Pit East Face Based on Inverse Velocity Model
The Majdanpek open pit mine south district is currently active mining prospect of copper ore exploitation in eastern Serbia. Its depth is approaching the termination depth and occurrences of large-scale instabilities and global instability of the final pit slope is possible. These can generate catastrophic mass movement inside an area that encloses a regional road route and the Pek River bed which is channelled along the outer contour of the pit. The displacements that were noted in early 2023, in the ...Miloš Marjanović, Stefan Milanović, Nikola Simić, Lazar Kričak. "Failure Estimation of the Majdanpek Open Pit East Face Based on Inverse Velocity Model" in Regional Symposium on Landslides in the Adriatic-Balkan Region, Belgrade, 15-18th May 2024, University of Belgrade, Faculty of Mining and Geology (2024). https://doi.org/10.18485/resylab.2024.6.ch46
-
Coal homogenization stockyard sizing “Tamnava – Zapad” case study
... stacked in 25 to 150 layers. The example in Figure 2 shows the problem when the pit operates at a lower capacity, and in a zone containing coal with a small quality range. To avoid the stacker operating below minimum travel speed, it will occasionally have to stop and stack, which is not rare in practice ...
... reserves at the stockyard is shown in Figure 4 and Table 1 on the example of the "Tamnava - Zapad" pit. The example shows stacking in two rows, in four and six piles when the stacking capacity equals the reclaiming capacity, because 2 reclaimers and one stacker are used. Figure 4. Number of ...
... the "Tamnava – Zapad" pit Thus for the maximum hourly pit capacity of 5000 t and the permitted speed range of the stacker (4-20 m/min) coal can be stacked in 16 to 90 layers. For a more realistic hourly capacity, the minimum and maximum number of layers changes. For a pit rate of 3000 t/h, coal ...Božo Kolonja, Dinko Knežević, Ranka Stanković, Dejan Stevanović, Detlef Trummer. "Coal homogenization stockyard sizing “Tamnava – Zapad” case study" in Proceedings of 13th International Symposium Continuous Surface Mining, ISCSM 2016, / (2016)