Претрага
54 items
-
Application of the Fuzzy Model in the Evaluation and Selection of Hydraulic Excavators on Open-Pit Lignite Mine
Stevan Đenadić, Miloš Tanasijević, Vladimir Milisavljević, Dragan Ignjatović, Predrag Jovančić (2021)The production of lignite in large open-pit mines is mainly performed with continuously operating equipment, where bucket-wheel excavators, bucket-chain excavators, belt conveyors, and spreaders are the basic machines. Smaller machines, usually of discontinuous operating nature, are commonly categorized as auxiliary machines. This paper presents the research related to the analysis of auxiliary machine parameters with the case study for a hydraulic excavator. The purpose of the analysis was to develop a model of rating quality of service of the ...Stevan Đenadić, Miloš Tanasijević, Vladimir Milisavljević, Dragan Ignjatović, Predrag Jovančić. "Application of the Fuzzy Model in the Evaluation and Selection of Hydraulic Excavators on Open-Pit Lignite Mine" in SSRN Electronic Journal, Elsevier BV (2021). https://doi.org/10.2139/ssrn.3945617
-
Geomechnical research for the new bucket wheel excavator testing at Open pit “Filijala”
Since 1976 cement marl excavation at open-pit mine „Filijala” is carried out by continuous exploitation technology using bucket wheel excavator SH 400 manufactured by Orenstein und Koppel (O & K) company. Due to the bucket wheel excavator time-worn and high operating cost it was necessary to replace it with new one. In order to test the new bucket wheel excavator and prove its capacity a testing zone was defined as test block for excavation, in which the bucket wheel ...Vladimir Čebašek, Nebojša Gojković, Veljko Rupar, Miodrag Pribićević. "Geomechnical research for the new bucket wheel excavator testing at Open pit “Filijala”" in Рударски гласник, Рударски институт - Београд (2020). https://doi.org/10.25075/BM.2020.07
-
Extensive vibrations of the belt conveyer drive electromotor of a bucket wheel excavator as a result of intesified wear-and-tear of its mount support
Vesna Damnjanović, Predrag Jovančić, Snežana Aleksandrović. "Extensive vibrations of the belt conveyer drive electromotor of a bucket wheel excavator as a result of intesified wear-and-tear of its mount support" in Journal of Vibroengineering (2017). https://doi.org/10.21595/jve.2016.17321
-
Cutting elements of bucket wheel excavators in lignite opensast mines: Methodology and performed solutions
Dragan Novaković, Predrag Jovančić (2016)Bucket and cutting elements geometry (teeth and hardened steel) have very powerful impact on effective operation of bucket wheel excavator, and that`s why, problems of optimal geometry of elements in specific conditions always are of special interest in mining science and technique. If we want to achieve satisfactory utilization of bucket wheel excavator, it is necessary to modulate geometry material characteristics and technological parameters, as regards bucket wheel excavator work regime, and bucket wheel working performances, and also bucket ...Dragan Novaković, Predrag Jovančić. "Cutting elements of bucket wheel excavators in lignite opensast mines: Methodology and performed solutions" in 13th International symposium Continuous Surface Mining ISCSM 2016, 12-14 September 2016, Belgrade – Serbia, Belgrade : Yugoslav Opencast Mining Committee, Belgrade (2016)
-
Determining the Availability of Continuous Systems at Open Pits Applying Fuzzy Logic
This work presents a model for determining the availability of continuous systems at open pits by applying fuzzy logic and fuzzy inference systems. The applied model was formed by the synthesis of independent partial indicators of availability. The model is based on an expert system for assessing the availability of continuous mining systems. The availability of the system, as a complex state parameter, is decomposed into the partial indicators, reliability, and convenience of maintenance, and the fuzzy compositions, used ...системи, континуални систем експоатације, површински коп, рударство, расположивост, фази логика, max–min композиција, min–max композицијаMiljan Gomilanović, Miloš Tanasijević, Saša Stepanović. "Determining the Availability of Continuous Systems at Open Pits Applying Fuzzy Logic" in Energies, MDPI AG (2022). https://doi.org/10.3390/en15186786
-
Applying the Fuzzy Inference Model in Maintenance Centered to Safety: Case Study – Bucket Wheel Excavator
Predrag Jovančić, Miloš Tanasijević, Vladimir Milisavljević, Aleksandar Cvjetić, Dejan Ivezić, Uglješa Bugarić (2020)Predrag Jovančić, Miloš Tanasijević, Vladimir Milisavljević, Aleksandar Cvjetić, Dejan Ivezić, Uglješa Bugarić. "Applying the Fuzzy Inference Model in Maintenance Centered to Safety: Case Study – Bucket Wheel Excavator" in Applications and Challenges of Maintenance and Safety Engineering in Industry 4.0 , Pennsylvania : IGI Global (2020). https://doi.org/10.4018/978-1-7998-3904-0
-
Утицај похабаности резних елемената роторног багера на ниво вибрација погона за копање
Филип Милетић (2023)У докторској дисертацији је анализиран утицај похабаности резних елемената роторног багера на потрошњу електричне енергије и ниво амплитуде вибрација погона за копање. Креиран је модел који у функцији стања резних елемената дефинише зависност разматраних физичких феномена. За развој модела примењене су једначине теорије осцилација и Ватметарска метода [1] којом се одређује потрошња електричне енергије. За верификацију модела извршена су мерења на роторном багеру SRs2000.32/5+VR ангажованом на откопавању откривке на површинском копу Тамнава–Западно поље. Обављено је пет мерења. Резни елементи су ...Филип Милетић. Утицај похабаности резних елемената роторног багера на ниво вибрација погона за копање, Београд : [Ф. Милетић], 2023
-
Dynamic behavior and stress field of excavator SchRs740 extended boom
Petrović Branko, Petrović Ana, Ignjatović Dragan, Grozdanović Ines. "Dynamic behavior and stress field of excavator SchRs740 extended boom" in 7th International Scientific and Expert Conference of the International TEAM Societ, Beograd: (2015): 345-348
-
Dependability as the Criteria for Bucket Wheel Excavator Revitalization
Tanasijević Miloš, Ivezić Dejan, Ignjatović Dragan, Polovina Dragan. "Dependability as the Criteria for Bucket Wheel Excavator Revitalization" in Journal of Scientific and Industrial Research 70 no. 1, Rajasthan, India:Scientific Publishers (2011): 13-19
-
Diagnostics of Bucket Wheel Excavator Discharge Boom Dynamic Performance and Its Reconstruction
Brkić Aleksandar, Maneski Taško, Ignjatović Dragan, Jovančić Predrag, Spasojević Brkić Vesna. "Diagnostics of Bucket Wheel Excavator Discharge Boom Dynamic Performance and Its Reconstruction" in Journal of Maintenance and Reliability 16 no. 2, :Polish Maintenance Society (2014): 188-197
-
Numerical and experimental diagnostic of dynamic behavior of the rotor-excavator construction
Maneski Taško, Jovančić Predrag, Ignjatović Dragan, Milošević Mitić Vesna, Trišović Nataša. "Numerical and experimental diagnostic of dynamic behavior of the rotor-excavator construction" in Third Serbian (28th Yu) Congress on Theoretical and Applied Mechanics 1, Vlasina Lake:Serbian society of mechanics (2011): 629-636
-
Impact of the Bucket Wheel Support at Technical Parameters of the Block and Bucket Wheel Excavator Capacity
Ignjatović Dragan, Petrović Branko, Jovančić Predrag, Bošković Saša. "Impact of the Bucket Wheel Support at Technical Parameters of the Block and Bucket Wheel Excavator Capacity" in 12th International Symposium Continuous Surface Mining – ISCSM2014 1, Aachen:Springer (2014): 73-82. https://doi.org/DOI: 10.1007/978-3-319-12301-1
-
Load bearing steel structure diagnostics on bucket wheel excavator, for the purpose of failure prevention
Jovančić Predrag, Ignjatović Dragan, Tanasijević Miloš, Maneski Taško. "Load bearing steel structure diagnostics on bucket wheel excavator, for the purpose of failure prevention" in Journal of Engineering Failure Analysis 18 no. 4, :Elsevier (2011): 1203-1211. https://doi.org/10.1016/j.engfailanal.2011.03.
-
Relation between numerical model and vibration: behavior diagnosis for bucket wheel drive assembly at the bucket wheel excavator
Jovančić Predrag, Tanasijević Miloš, Ignjatović Dragan. "Relation between numerical model and vibration: behavior diagnosis for bucket wheel drive assembly at the bucket wheel excavator" in Journal of Vibroengineering 12 no. 4, :JVE International Ltd. (2010): 500-513
-
Ocena preostalih radnih mogućnosti rotornog bagera metodom primenjene ekspertske ocene sa empirijskim faktorom korekcije - Remaining operational capabilities evaluation of bucket wheel excavator by application of expert assessment method with empirical co
Polovina Dragan, Ivković Slobodan, Ignjatović Dragan, Tanasijević Miloš. "Ocena preostalih radnih mogućnosti rotornog bagera metodom primenjene ekspertske ocene sa empirijskim faktorom korekcije - Remaining operational capabilities evaluation of bucket wheel excavator by application of expert assessment method with empirical co" in Integritet i vek konstrukcija - Structural Integrity and Life 10 no. 1, Beograd:Društvo za integritet i vek konstrukcija i Institut IMS - Society for Structural Integrity and Life & IMS Institute (2010): 31-41. https://doi.org/620.169.1:621.879.48
-
Adaptive neuro-fuzzy prediction of operation of the bucket wheel drive based on wear of cutting elements
The capacity of the rotor excavator depends largely on the operation of the subsystem for digging. There is a great contribution to the correct and sharp teeth when the capacity is the highest. In the function of time, the teeth become clogged due to abrasive wear, or changes in their geometric shape. To analyze the bucket wheel drive in depend on wear of the cutting elements in this study adaptive neuro fuzzy inference system (ANFIS) approach was implemented. ANFIS ...Filip Miletić, Predrag D. Jovančić, Milos Milovančević, Dragan Ignjatović. "Adaptive neuro-fuzzy prediction of operation of the bucket wheel drive based on wear of cutting elements" in Advances in Engineering Software, Elsevier BV (2020). https://doi.org/10.1016/j.advengsoft.2020.102824
-
Approach to operational mine planning: Case study Tamnava West
... stockyards 2. Homogenization of coal in mine site can be achieved at: - mining block (production of one excavator on one bench), - the connecting conveyors (production of all excavator on different benches). For the management of the coal homogenization process at the mining block level ...
... based on continuous mining equipment. Coal and interburden is excavated with 4 ECC systems (Bucketwheel Excavator - Conveyors-Crushing Plant), and 2 ECS systems (Bucketwheel Excavator- Conveyors-Spreader) are engaged on overburden excavation. General technological scheme of open pit Tamnava ...
... of bucket wheel excavator (BWE) engaged on that bench (it matches the actual width of the block which is excavated by particular BWE). 2. Also, bench area is divided parallel to the direction of excavation advancing. This division simulates the advancing of each excavator in the mining block ...Dejan Stevanović, Mirjana Banković, Milica Pešić Georgiadis, Ranka Stanković. "Approach to operational mine planning: Case study Tamnava West" in Tehnika, Beograd : Savez inženjera i tehničara Srbije (2014). https://doi.org/10.5937/tehnika1406952S
-
Development of an integrated model for open-pit-mine discontinuous haulage system optimization
Čelebić Miodrag, Bajić Dragoljub, Bajić Sanja, Banković Mirjana, Torbica Duško, Milošević Aleksej, Stevanović Dejan (2024)Čelebić Miodrag, Bajić Dragoljub, Bajić Sanja, Banković Mirjana, Torbica Duško, Milošević Aleksej, Stevanović Dejan. "Development of an integrated model for open-pit-mine discontinuous haulage system optimization" in Sustainability, MDPI (2024). https://doi.org/10.3390/su16083156
-
Human factor risk management procedures applied in the case of open pit mine
Snežana Kirin, Aleksandar Sedmak, Wei Li, Miodrag Brzaković, Igor Miljanović, Ana Petrović, Simon Sedmak (2021)Risk management aims to provide a controlled work environment to ensure the safe operation of the high-risk systems. It is a dynamic process which work in a continual state of change. The issue of human factor risk and rules and regulations in open pit mine is a main focus of this paper in order to develop predictive models of behavior of workers in relation to compliance with the procedures and rules. Presented survey was conducted in open pit coal ...Snežana Kirin, Aleksandar Sedmak, Wei Li, Miodrag Brzaković, Igor Miljanović, Ana Petrović, Simon Sedmak. "Human factor risk management procedures applied in the case of open pit mine" in Engineering Failure Analysis (2021). https://doi.org/https://doi.org/10.1016/j.engfailanal.2021.105456
-
Determining the Impact of Cutting Elements State on the Bucket–Wheel Excavator Vibration and Energy Consumption
Background There are two types of specifc sizes’ measurements. The frst is the measurement of energy consumption in a working technological process, and the second is the measurement of vibration, which is displayed over amplitudes of speed. There is an interplay between these two processes. Increasing the power consumption, the value of the vibration speed amplitudes increases. Purpose The process of the determination of machining parameters was based on minimizing the power consumption and vibration of the cutting tool, ...Filip Miletić, Predrag Jovančić, Miloš Milovančević, Miloš Tanasijević, Stevan Đenadić. "Determining the Impact of Cutting Elements State on the Bucket–Wheel Excavator Vibration and Energy Consumption" in Journal of Vibration Engineering & Technologies, Springer (2022). https://doi.org/10.1007/s42417-022-00482-3