Претрага
2213 items
-
Influence of mono- and two-component organic modifiers on determination of lipophilicity of tetradentate Schiff bases
The infuences of the application of mono- and two-component organic modifers on lipophilicity determination of 12 tetradentate Schif bases by reversed-phase thin layer chromatography were investigated. The main goal is to estimate types of interaction between observed compounds and components of the applied chromatographic systems and establish some behaviour pattern in order to easier choose a combination of organic modifers which will simulate interaction in biological systems based on the facts that the same basic intermolecular interactions are responsible ...Materials Chemistry, Industrial and Manufacturing Engineering, General Chemical Engineering, Biochemistry,General ChemistryNikola Stevanović, Aleksandar Mijatović, Aleksandar Lolić, Mario Zlatović, Rada Baošić. "Influence of mono- and two-component organic modifiers on determination of lipophilicity of tetradentate Schiff bases" in Chemical Papers, Springer Science and Business Media LLC (2021). https://doi.org/10.1007/s11696-021-01884-5
-
Influence of mono- and two-component organic modifiers on determination of lipophilicity of tetradentate Schiff bases
The infuences of the application of mono- and two-component organic modifers on lipophilicity determination of 12 tet radentate Schif bases by reversed-phase thin layer chromatography were investigated. The main goal is to estimate types of interaction between observed compounds and components of the applied chromatographic systems and establish some behaviour pattern in order to easier choose a combination of organic modifers which will simulate interaction in biological systems based on the facts that the same basic intermolecular interactions are ...Materials Chemistry, Industrial and Manufacturing Engineering, General Chemical Engineering, Biochemistry, General ChemistryNikola Stevanović, Aleksandar Mijatović, Aleksandar Lolić, Mario Zlatović, Rada Baošić. "Influence of mono- and two-component organic modifiers on determination of lipophilicity of tetradentate Schiff bases" in Chemical Papers, Springer Science and Business Media LLC (2021). https://doi.org/10.1007/s11696-021-01884-5
-
Development of the Cost-Based Model for Monitoring the Lifetime of the Earth Moving Machines
This paper presents the model for the identification of reference points on the lifetime curve of engineering systems. This curve commonly represents the increase and decline of failure in relation to time. A direct correlation between failure rate and costs is assumed in this paper, therefore, statistical and empirical analysis of costs provided reference points. This approach is used for positioning stages of the engineering system’s lifetime with a minimal number of failures and costs, regardless of whether these ...Electrical and Electronic Engineering,Industrial and Manufacturing Engineering, Control and Optimization, Mechanical Engineering, Computer Science (miscellaneous), Control and Systems EngineeringUgljesa Bugarić, Milos Tanasijević, Stevan Djenadić, Dragan Ignjatović, Ivan Janković. "Development of the Cost-Based Model for Monitoring the Lifetime of the Earth Moving Machines" in Machines, MDPI AG (2022). https://doi.org/10.3390/machines10110995
-
Self-Engineering: Possibilities for Maintenance Operations in the Mining Machines Industry
Self-engineering is a relatively new branch of knowledge that aims to understand how systems could “autonomously” re-configure or repair themselves without the intervention of the operators. A direct field of application is within the maintenance spectrum. Having systems or machines capable of self-detecting or even self-repairing could represent a game-changer, in capital asset fields such as the mining industry in particular. This paper aims to investigate the possible benefits and challenges of self-engineering / self-maintenance concerning mining machines, specifically bucket-wheel ...self-engineering, self-maintenance, maintenance operations, mining industry, bucket-wheel excavator, gearbox revitalizationSteven Manders, Milorad Pantelić, Vladimir Milisavljević, Alberto Martinetti. "Self-Engineering: Possibilities for Maintenance Operations in the Mining Machines Industry" in SSRN Electronic Journal, Elsevier BV (2021). https://doi.org/10.2139/ssrn.3945979
-
Life Cycle Assessment of Individual Wood Biomass Heating Systems in Households
The use of solid fuels (wood biomass and coal) for heating of households continues to be common practice within European countries. Solid fuel combustion in households contributes more than 46% to total emissions of fine particulate matter. In this study, a life-cycle assessment (LCA) of firewood-based and pellet-based heating systems is performed. These two systems represent two different types of individual wood biomass heating systems. In the case of the firewood-based heating systems, it is analyzed a typical stove ...... lifecycle of each HS (materials, manufacturing, transportation, use, and final disposal) [10]. Life cycle assessment (LCA) systematically analyzes pollution and resource connected to delivering a specific product or service. As such, the LCA identifies environmental hot spots and enables a comparison of different ...
... (wood) 80 17 2,383 The efficiency of HSs and LHV are assumed to remain unchanged for the entire life span of the systems [9]. To avoid unequal treatment of HSs, it is assumed the same transportation distances from the manufacturing location to the house, and the same type of lorry for the analyzed ...
... Systems in Households | Boban Pavlović, Dejan Ivezić, Marija Živković | 5th International Scientific Conference ”Conference on Mechanical Engineering Technologies and Applications” COMETa2020, East Sarajevo, 2020 | 2020 | | http://dr.rgf.bg.ac.rs/s/repo/item/0005065 Дигитални репозиторијум Рударско-геолошког ...Boban Pavlović, Dejan Ivezić, Marija Živković. "Life Cycle Assessment of Individual Wood Biomass Heating Systems in Households" in 5th International Scientific Conference ”Conference on Mechanical Engineering Technologies and Applications” COMETa2020, East Sarajevo, 2020, University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo (2020)
-
A fuzzy-based decision support model for effectiveness evaluation - a case study of examination of bulldozers
Effectiveness evaluation is one of the basic components of engineering asset management and maintenance engineering in general. Effectiveness is an overall concept representing a measurement of quality of service level for the analyzed engineering system. This concept contains a series of partial indicators relating to time in operation and time for maintenance activities, as well as functional properties of the system. This article describes the analysis and structuring of partial indicators, as well as the development of a model ...Miloš Tanasijević, Predrag Jovančić, Dejan Ivezić, Uglješa Bugarić, Radiša Đurić. "A fuzzy-based decision support model for effectiveness evaluation - a case study of examination of bulldozers" in International Journal of Industrial Engineering: Theory, Applications and Practice (2019)
-
Cultural Heritage and Protection of Hand-Wheeled Pottery Manufacture in Western Serbia: Characteristics of Zlakusa Pottery Based on Sem-Eds and Optical Microscopy
... the pots and their outer rims. Observed pores in sample 1 are of random orientation and size, indicating slower rotations of the potter’s wheel during the manufacturing process. Sample 2 has a specific fluid-structure that is consistent with the way it was fabricated. By the size and orientation ...
... terms of elemental composition observed by EDS, to the distribution and appearance of pores concerning the manufacturing process. Further investigations are necessity for an establishment of the standards that will guarantee and protect the originality together with the cultural heritage of the ...
... Miskolc, Hungary CULTURAL HERITAGE AND PROTECTION OF HAND-WHEELED POTTERY MANUFACTURE IN WESTERN SERBIA: CHARACTERISTICS OF ZLAKUSA POTTERY BASED ON SEM-EDS AND OPTICAL MICROSCOPY MILOŠEVIĆ, M.1, ZDRAVKOVIĆ, A.1, ĐORĐEVIĆ, B.2 & JELIĆ, I.3 1Faculty of Mining and Geology, University of Belgrade ...Milošević Maja, Zdravković Alena, Đordjević Biljana, Jelić Ivana. "Cultural Heritage and Protection of Hand-Wheeled Pottery Manufacture in Western Serbia: Characteristics of Zlakusa Pottery Based on Sem-Eds and Optical Microscopy" in 8th Mineral Sciences in the Carpathians Conference, Acta Mineralogica-Petrographica, Miskolc, Hungary, Department of Mineralogy, Geochemistry and Petrology, University of Szeged, Szeged, Hungary (2021)
-
Towards a Mining Equipment Ontology
... in IT applications in mining engineering and other engineering disciplines whose importance is not always fully understood. Namely IT applications need proper and consistent use of terminology in order to build interoperable information systems. To that end engineering disciplines need terminological ...
... for mining engineering developed at the University of Belgrade Faculty of Mining and Geology, can be used for generating a mining equipment ontology. RudOnto is an integral part of a specialized mining engineering information system, which features functionalities for management and maintaining ...
... le in almost all mining engineering areas, including mining equipment management and maintenance. Basically, IT is introduced through computer-aided information systems, with the aim of securing reliable information for management and decision making in mining engineering systems [2]. Various IT ...Ranka Stanković, Ivan Obradović, Olivera Kitanović, Ljiljana Kolonja. "Towards a Mining Equipment Ontology" in Proceedings of the 12th International Conference Research and Development in Mechanical Industry, RaDMI 2012, September 2012, Vrnjačka Banja, Serbia no. 1, Vrnjačka Banja, Serbia : SaTCIP (Scientific and Technical Center for Intellectual Property) Ltd. (2012)
-
Refinement of waste phosphogypsum from Prahovo, Serbia: characterization and assessment of application in civil engineering
Josip Išek, Lazar Kaluđerović, Nikola Vuković, Maja Milošević, Ivana Vukašinović, Zorica Tomić (2020)... according to the mineral origin, from 260 to 1860 Bq kg for apatite and from 460 to 640 Bq kg for phosphorite (Saueia, 1998). Through the manufacturing process, ~80% of ? 'Ra, 14% of ŠU and 30% of Th tend to be enriched in phosphogypsum, and the rest remains in phosphoric acid (Jung et al, 2017). This ...
... MPC(K) Q) where Cgax Crh and Ck are the measured concentrations and MPC (Ra), MPC(Th) and MPC(K) are the maximum permissible con- centrations of “Ra, Th and K, respectively. Equivalent values for building materials used for interior, exterior and civil engineering construction as a base for ...
... y-indices, with limiting values <1, the PG1 and PG2 samples should be rejected as materials for exterior and interior usage (Table 5) and may be used only in civil engin- eering construction as a base for roads, playgrounds and other civil engineering constructions. On the other hand, the PG1P sample ...Josip Išek, Lazar Kaluđerović, Nikola Vuković, Maja Milošević, Ivana Vukašinović, Zorica Tomić. "Refinement of waste phosphogypsum from Prahovo, Serbia: characterization and assessment of application in civil engineering" in Clay Minerals, Cambridge University press (2020). https://doi.org/10.1180/clm.2020.11
-
Assessment of environmental radioactivity and health hazard at Stara Planina region
Slavko Dimovic, Boris Vakanjac, Ivana Jelic, Milena Rikalovic, Vesna Ristic-Vakanjac, Radoje Bankovic (2021)Циљ студије је био да се процени потенцијални ризик од зрачења у близини напуштених рудника уранијума, јаловишта или лежишта уранијума на Старој планини у Србији. За процену ризика одређено је неколико параметара: активност еквивалента радијума, Raeq, екстерни индекс опасности, Hex, брзина апсорбоване дозе гама зрачења, D, годишња ефективна доза на позадинској експозицији гама гама на отвореном, AEDoutdoor и ризик од рака током живота, ELCR. Добијени резултати су показали да сви узорци, осим једног, имају Raeq вредност и до два ...Slavko Dimovic, Boris Vakanjac, Ivana Jelic, Milena Rikalovic, Vesna Ristic-Vakanjac, Radoje Bankovic. "Assessment of environmental radioactivity and health hazard at Stara Planina region" in Nuclear Technology and Radiation Protection (2021). https://doi.org/10.2298/NTRP2004354D
-
Analysis Of the Process Of Carbon Capture Utilization And Storage In Underground Reservoirs
John Nyame (2024)The importance of mitigating the effects of global climate change has necessitated an in-depth exploration of innovative strategies to reduce carbon dioxide (CO2) emissions. Among these strategies, Carbon Capture, Utilization, and Storage (CCUS) has emerged as a promising and transformative solution. This master thesis delves into the diverse realm of CCUS processes, aiming to unravel the positives challenges, and opportunities within this dynamic field. The analysis begins with a systematic examination of carbon capture technologies, encompassing post-combustion, pre-combustion, and oxy-fuel combustion ...... large-scale utilization stem from their manufacturing routes, which are very expensive, and their long-term stability and reliability. Polymeric membranes that can be easily formulated in fiber modules have shown tremendous potential for large-scale industrial applications [44]. Inorganic membranes ...
... regional industries, leading infrastructure and logistics operators, global engineering firms, and academic institutions in a plan to decarbonize the UK's largest industrial region. This will be enabled by shared trans-regional pipelines for low-carbon hydrogen and captured carbon emissions, creating ...
... captured for enhanced oil recovery and carbon-based products manufacturing and finally carbon underground storage and transport based on the economic, environmental and policy factors. Figures 1.2 and 1.3 show a background of the carbon capture and storage process (CCS) and an example of a full-scale ...John Nyame. Analysis Of the Process Of Carbon Capture Utilization And Storage In Underground Reservoirs, 2024
-
Application of VIКOR method in the selection of an optimal splution of excavation “Borska Reka” ore deposit
Sanja Bajić, Dragoljub Bajić, Branko Glušćević, Radmila Gaćina. "Application of VIКOR method in the selection of an optimal splution of excavation “Borska Reka” ore deposit" in 9th International Conference Mining and Environmental protection MEP, 24 – 27 May 2023, Sokobanja, Serbia , Belgrade : University of Belgrade-Faculty of mining and geology (2023)
-
The optimization of auxiliary machinery in open-cast lignite mines: a case study of bulldozers
One of the most important prerequisites for the successful operation of the open-cast lignite mine is to carry out all the auxiliary works timely with the necessary quality. The most important and most commonly used auxiliary machines are bulldozers. Engaging time of bulldozers use is in direct relation with the coefficients of the time and capacity utilization of the continuous system for the excavation of coal and tailings, which indicates their importance. More than 100 bulldozers have been hired ...... duration. Life cycle is defined by several stages: Concept / project requirements; Project concept; Main project – designing; Manufacturing: Application / operation and Decommissioning. As shown in Figure 2, operation of the machine with the highest profit is just a short interval within the ...
... International Platinum Conference ‘Platinum in Transformation’, The Southern African Institute of Mining and Metallurgy, 2008, pp. 297-305. Life Cycle Asset Management, Life Cycle Engineering, Inc. Available online: www.LCE.com 6. Jankovic, I.; Djenadic, S.; Ignjatovic, D.; Jovancic, P.; Subaranovic ...
... selection, including savings and improvements, can be achieved by these activities: In-time replacement of auxiliary machines and vehicles; Usage of proven and quality machines with implemented unification as much as possible; Improvement of maintenance system; Implement modern and improved technologies ...Dragan Ignjatović, Predrag Jovančić, Stevan Đenadić, Ivan Janković, Ivica Ristović. "The optimization of auxiliary machinery in open-cast lignite mines: a case study of bulldozers" in 7th International Symposium Mining and Environmental Protection, University of Belgrade, Faculty of Mining and Geology, Belgrade, Serbia (2019)
-
Simulation of Hydrogeological Environmental Discharge in Case of Interruption Constant Observations
Marina Čokorilo Ilić, Dragoljub Bajić, Miroslav Popović. "Simulation of Hydrogeological Environmental Discharge in Case of Interruption Constant Observations" in International Scientific Conference - Sinteza 2024, Belgrade, 16. maj 2024, Singidunum University (2024). https://doi.org/10.15308/Sinteza-2024-288-294
-
Mineralogical Discrimination between Authentic and Recent Imitations of Pottery Manufacture in Zlakusa, Serbia
... would indicate the manufacturing procedure. Sample -1- has slightly higher water absorption than the the rest of the samples. Differences in terms of manufacture processes and their characteristics are evident and should be emphasized for better understanding and awareness of the cultural ...
... electric drive) marked as -4- and by moulding (application of a mould) marked as -5-. Close examination of surface features and morphology was conducted to determine the characteristic attributes for a specific technique. Phase and mineral composition, texture, and structure of the samples ...
... it a unique phenomenon, in technological terms, is the fact that with the discovery of new techniques and production processes, the old ways, already adopted and mastered continued to live and actively coexist until today. This also brings a rise in imitations of pottery manufacture. ...Maja Milošević, Mihovil Logar, Biljana Đorđević. "Mineralogical Discrimination between Authentic and Recent Imitations of Pottery Manufacture in Zlakusa, Serbia" in Nordic Clay Meeting/3rd Symposium Clays & Ceramics 2021, The Latvian Clay Science Society (2021)
-
Determining the Availability of Continuous Systems at Open Pits Applying Fuzzy Logic
This work presents a model for determining the availability of continuous systems at open pits by applying fuzzy logic and fuzzy inference systems. The applied model was formed by the synthesis of independent partial indicators of availability. The model is based on an expert system for assessing the availability of continuous mining systems. The availability of the system, as a complex state parameter, is decomposed into the partial indicators, reliability, and convenience of maintenance, and the fuzzy compositions, used ...системи, континуални систем експоатације, површински коп, рударство, расположивост, фази логика, max–min композиција, min–max композицијаMiljan Gomilanović, Miloš Tanasijević, Saša Stepanović. "Determining the Availability of Continuous Systems at Open Pits Applying Fuzzy Logic" in Energies, MDPI AG (2022). https://doi.org/10.3390/en15186786
-
Upravljanje proizvodnjom nafte – novi alat na bazi fazi logike
... agriculture, industrial manufacturing, mining and untreated urban runoff and sewage cause most water quality issues. The development of industrial farming has resulted to increased applications of fertilizers. These and other pollutants from industrial water generate hazards to the environment and health ...
... of process planning. Applied Engineering Letters, 2 (4), p. 130-138. [3] Lukić, D., Milošević, M., Antić, A., Borojević, S., Ficko. M. (2017). Multi- criteria selection of manufacturing processes in the conceptual process planning. Advances in Production Engineering and Management , 12 (2), p. 151-162 ...
... Case study on topology optimized design for additive manufacturing, COTech, IOP Conference Series: Materials Science and Engineering, 2017. [4] Junk, S., Klerch, B., Nasdala, L., Hochberg, U.: Topology optimization for additive manufacturing using component of a humanoid robot, Procedia CIRP, ISSN ...Мирослав Црногорац, Душан Даниловић, Лола Томић. "Upravljanje proizvodnjom nafte – novi alat na bazi fazi logike" in IX Naučno stručni skup Preduzetništvo, inženjerstvo i menadžment Zrenjanin, 24.10.2020. god., Visoka tehnička škola strukovnih studija u Zrenjaninu (2020)
-
Definition of criteria and alternatives for choosing the optimal mining method deposits when applying multi: Criteria optimization, Belgrade, June 2024
Sanja Bajić, Dragoljub Bajić, Branko Gluščević, Radmila Gaćina, Josip Išek. "Definition of criteria and alternatives for choosing the optimal mining method deposits when applying multi: Criteria optimization, Belgrade, June 2024" in Podzemni radovi, Beograd, jun 2024, Centre for Evaluation in Education and Science (CEON/CEES) (2024). https://doi.org/10.5937/podrad2444071B
-
Mineralogical study of clays from Dobrodo, Serbia, for use in ceramics
Maja Milošević, Predrag Dabić, Sabina Kovač, Lazar Kaluđerović, Mihovil Logar. "Mineralogical study of clays from Dobrodo, Serbia, for use in ceramics" in Clay Minerals, Mineralogical Society (2019). https://doi.org/10.1180/clm.2019.49
-
Structural characterization of traditional pottery produced from local clay, Rujište (Ražanj, Central Serbia), in an effort to preserve its geoheritage
... additional tempers added. Pottery manufacture with these specific raw materials and the final function of the product is closely connected, when material dictates technique. Production of pottery and the manufacturing process is yet to be closely investigated. References Djordjević, B. 2021 ...
... a mixture. As some of the slabs have rolled and rough edges they may be regarded as illite and/or halloysite. Morphology varies from short tubular, spheroidal and elongated tubules, which are the most common. EDS data confirmed hydroxides of illite and iron. Illite minerals deposited from formation ...
... Management and Events Ltd., Sofia Printing House: Bulged, Sofia 1505 Editors: Ruslan I. Kostov, Radostina Atanassova ISBN 978-954-92875-6-1 © Earth and Man National Museum, 2021 © Bulgarian Mineralogical Society, 2021 9th International Conference Mineralogy and Museums ...Maja Milošević, Biljana Đorđević, Alena Zdravković . "Structural characterization of traditional pottery produced from local clay, Rujište (Ražanj, Central Serbia), in an effort to preserve its geoheritage" in 9th International Conference Mineralogy and Museums, Sofia, Bulgaria, Earth and Man National Museum and Bulgarian Mineralogical Society (2021)