Претрага

Упит dcterms_subject_txt:Numerical modeling

250 items

  • Mitigating hydrate formation in onshore gas wells: A case study on optimization techniques and prevention

    Milica Ješić, Bojan Martinović, Stefan Stančić, Miroslav Crnogorac, Dušan Danilović (2023)
    Gas wells, particularly those situated onshore, play a vital role in the global energy sector by supplying a significant portion of natural gas. However, operational challenges, notably gas hydrate formation, pose substantial issues, leading to complications such as flowline blockages and unexpected well shutdowns. Gas hydrates, crystalline structures resembling ice, ...
    Gas Well, Gas Hydrate Formation, Well Modeling, Well Performance Optimization, Choke Position Adjustments, Methanol Injection

  • Preliminary impact assessment of No2 emission from a heating plant on air pollution: case of Zemun, Serbia

    Boban Pavlović, Uroš Pantelić, Marija Živković, Dejan Ivezić (2023)
    The aim of this paper is to provide a preliminary evaluation of the impact caused by NO2 emissions from a heating plant on the local air quality. To model the spatial distribution of NO2 emissions from the heating plant, the AERMOD model was employed. The evaluation was conducted by analyzing and contrasting the simulated NO2 concentration from the heating plant with the overall NO2 concentration recorded at the nearest monitoring station over the entire heating season. The study focused ...
    AERMOD, квалитет ваздуха, моделирање дисперзије загађења, топлана, NO2 загађење

  • Back-arc underplating provided crustal accretion affecting topography and sedimentation in the Adria microplate

    Paolo Mancinelli, Vittorio Scisciani, Cristina Pauselli, Gérard M. Stampfli, Fabio Speranza, Ivana Vasiljević (2021)
    Supported by evidence of deep crustal sources for the observed magnetic anomalies in Central Italy and by outcropping gabbros in the Croatian archipelago, we model the observed gravity and magnetic anomalies in the Central Adriatic Sea and surroundings. We suggest that the major magnetic anomalies in the area are related to a wide underplating and propose that this volume represents the first stage of the back-arc Adria continental breakup in Early Permian times. During the Palaeotethys-Adria collision, underplating has ...
    Underplating, akrecija kore, Magnetske anomalije, Jadranska ploča

  • Modeliranje i simulacija energetske tranzicije u sektoru domaćinstava

    Boban S. Pavlović (2022)
    Aktuelnu energetsku tranziciju odlikuje ubrzanje procesa dekarbonizacije energetskih sistema, unapređenje energetske efikasnosti, razvoj čistijih tehnologija baziranih na obnovljivim izvorima energije i održivije korišćenje prirodnih resursa. Da bi se napravio ovako krupan zaokret u postojećim energetskim sistemima, osim promene postojećih tehnologija, potrebno je u planiranje energetske tranzicije uključiti i političke, sociološke, ekonomske i ekološke aspekte, a pre svega obrasce ponašanja i donošenja odluka krajnjih potrošača. Predmet istraživanja u disertaciji je energetska tranzicija sektora domaćinstva, preciznije tranzicija u grejanju domaćinstava, imajući u ...
    energetika, energetska tranzicija, energetsko planiranje, energetsko modeliranje, obnovljivi izvori energije, domaćinstva, ponašanje potrošača

  • Transition pathways of household heating in Serbia: Analysis based on an agent-based model

    Boban Pavlović, Dejan Ivezić, Marija Živković (2022)
    To explore pathways of the energy transition of household heating, an agent-based simulation model was developed for the case of the Serbian household sector. The model is focused on individual entities (households) with the objective to explore the effects of policy instruments on energy transition in households with individual heating systems. Empirically collected survey data were used as input for households’ attitudes towards sustainable heating. Simulations showed that the proposed instruments would lead to higher heating efficiency and less ...
    energetska tranzicija, modeliranje bazirano na agentima, sistemi grejanja, sektor domaćinstva, obnovljivi izvori energije, emisija CO2

  • A hydrogeological model of the open-cast mine Tamnava - West Field (Kolubara Coal Basin, Serbia)

    Jelena Ratković, Dušan Polomčić, Dragoljub Bajić, Bojan Hajdin (2016)
    ... distribution of water-bearing media) and filtration properties. Hydrogeologic modeling is schematization of the hydrogeologic system, due to the hydrogeologic and hydrodynamic complexity of the conditions, and includes modeling of the (Polomčić, 2002): - flow field (aquifer geometry), - filtration ...
    ... hydrostratigraphic units) and hydrogeologic parameters of the porous medium, followed by specifying initial and boundary conditions and selecting the numerical method to be applied (Krešić, 2006; Krešić and Mikszewski, 2012). 4. RESULTS The software used in this research, to create the conceptual ...
    ... t of sealing screen at lignite opencast mines. Metalurgia International, 18 (5), pp. 169-175. WELS, C., FERGUSON, P.R. and FAWCETT, M. (2012) Numerical groundwater flow modelling at the historic Rum Jungle mine site, northern Australia. In: MCCULLOUGH, C.D., LUND, M.A., and WYSE, L. (eds.) Proceedings ...

  • Numerical modelling of the roughly simultaneous emplacement of two distinct ophiolite belts

    Nikola Stanković, Vesna Cvetkov, Vladica Cvetković (2024)

  • Geotechnical Conditions for Construction of Savski Trg Metro Station as a Part of the Belgrade Metro Line One

    Nemanja Stanic, Dragoslav Rakic, Josip Isek, Slavoljub Simic (2024)
    In order to solve serious traffic congestion in Belgrade, a number of studies regarding the Belgrade Metro construction have been carried out since 1973. However, only in 2019, the routes of the future metro lines 1 and 2 were de-fined as a part of the General Metro Construction Project. The lines are de-signed to intersect at the location of Sava Square, where an interchange met-ro station will be built. It represents a complex geotechnical structure consist-ing of three different ...
    metro station, geotechnical modelling, displacements

  • Concepts for Improving Machine Learning Based Landslide Assessment

    Miloš Marjanović, Mileva Samardžić Petrović, Biljana Abolmasov, Uroš Đurić (2019)
    Katastar klizišta, Podložnost, Hazard, Mašinsko učenje, Uzorkovanje, Validacija

  • Numerical modelling of a single intra-oceanic subduction for the origin of the Balkan ophiolites

    Nikola Stanković, Vesna Cvetkov, Vladica Cvetković (2024)

  • Approach to operational mine planning: Case study Tamnava West

    Dejan Stevanović, Mirjana Banković, Milica Pešić Georgiadis, Ranka Stanković (2014)
    ... packages. For that reason in presented case study operational mine planning is done with Minex software. Key words: operational planning, geological modeling, coal quality control, mining block and cut. 1. INTRODUCTION Modern mining is characterized by continuous worsening of production conditions ...
    ... coal and other stratified deposits, such as phosphate, zinc, bauxite, iron ore, and platinum. Minex covers almost every part of geological modeling and mine planning process. It provides a fast and powerful set of modules for surface or underground mines, long or short term planning. Developing ...
    ... operational planning and coal quality control in Minex for the Tamnava West open pit, was based on 6 steps: - Preparation of data - Geological modeling - Ultimate pit design - Design of pit benches - Discretization of benches on mining blocks and cuts - Reporting 2.1.1. Preparation ...

  • Trans-Lithospheric Diapirism as a Possible Mechanism for Ophiolite Emplacement?

    Nikola Stanković, Taras Gerya, Vladica Cvetković, Vesna Cvetkov (2024)

  • INVENTS: A Hybrid Mine Ventilation Planning and Design System

    Lilić Nikola, Stanković Ranka, Obradović Ivan (2013)
    Ventilation system analysis is a complex process based on the calculation and analysis of numerous parameters. These problems can be successfully solved by the SimVent numerical package, but a full understanding and use of the obtained results require the involvement of an experienced specialist in the ventilation field. The solution was found in the creation of a hybrid system INVENTS, whose knowledge base represents a formalization of the expert knowledge in the mine ventilation field. In this paper we ...
    hybrid systems, mine ventilation, expert systems
    ... The VENTEX system was developed as a knowledge-based (symbolic) upgrade of the SimVent numerical package and it thus belongs to the category of coupled numerical and symbolic systems (Kowalik, 1986). The numerical part consists of SimVent simulation routines and the symbolic part of the mine ventilation ...
    ... ResNet software package The object-oriented approach in system structuring and modeling was used as the strategy for defining the model of processes and data in the development of INVENTS. In this paper UML (Unified Modeling Language), as a standard language for visualization, specification, constructing ...
    ... analysis is a complex process based on the calculation and analysis of numerous parameters. These problems can be successfully solved by the SimVent numerical package, but a full understanding and use of the obtained results require the involvement of an experienced specialist in the ventilation field. ...

  • Influence of DEM resolution on numerical modelling of debris flows in RAMMS - Selanac case study

    Jelka Krušić, Biljana Abolmasov, Mileva Samardžić Petrović (2019)
    Debris flows induced by intensive rainfall represent very hazardous phenomena in many parts of the World. Methods for prediction of runout distance of flow like mass movements are different and depending on the input data, rheology, and available or appropriate numerical solution. However, sometimes it is not easy to obtain pre event and post event high-resolution data in the rural or mountainous area. Thus, the topology of terrain is the most important input parameter for the every real case ...
    tecišta, modeliranje, RAMMS, DEM
    ... of DEM resolution on numerical modelling of debris flows in RAMMS - Selanac case study Jelka Krušić, Biljana Abolmasov, Mileva Samardžić Petrović Дигитални репозиторијум Рударско-геолошког факултета Универзитета у Београду [ДР РГФ] Influence of DEM resolution on numerical modelling of debris flows ...
    ... landslides, there are few approaches nowadays that should be considered: mathematical, constitutive (rheological) and finally numerical approach. Generally, numerical approaches are divided into two goups: empirical-statistical (Rickenmann, 1999, Legros, 2002), while others are based on physic ...
    ... Calculation of dense snow avalanches in three-dimensional terrain with the numerical simulation program RAMMS. Differential Equations.vol. Proceeding, pp. 709-716. Christen M, Kowalski J, Bartelt P (2010a) RAMMS: Numerical simulation of dense snow avalanches in three-dimensional terrain. Cold ...

  • INVENTS: a hybrid system for subsurface ventilation analysis

    Nikola Lilić, Ranka Stanković, Ivan Obradović (2000)
    Ventilation system analysis is a complex process based on the calculation and analysis of numerous parameters. These problems can be successfully solved by the SimVent numerical package, but a full understanding and use of the obtained results require the involvement of an experienced specialist in the ventilation field. The solution was found in the creation of a hybrid system INVENTS, whose knowledge base represents a formalization of the expert knowledge in the mine ventilation field. In this paper we ...
    ... The VENTEX system was developed as a knowledge-based (symbolic) upgrade of the SimVent numerical package and it thus belongs to the category of coupled numerical and symbolic systems (Kowalik, 1986). The numerical part consists of SimVent simulation routines and the symbolic part of the mine ventilation ...
    ... ResNet software package The object-oriented approach in system structuring and modeling was used as the strategy for defining the model of processes and data in the development of INVENTS. In this paper UML (Unified Modeling Language), as a standard language for visualization, specification, constructing ...
    ... analysis is a complex process based on the calculation and analysis of numerous parameters. These problems can be successfully solved by the SimVent numerical package, but a full understanding and use of the obtained results require the involvement of an experienced specialist in the ventilation field. ...

  • Machine Learning and Landslide Assessment in a GIS Environment

    Marjanović Miloš, Bajat Branislav, Abolmasov Biljana, Kovaćević Miloš (2018)

  • Hybrid model of evaluation of underground lead–zinc mine capacity expansion project using Monte Carlo simulation and fuzzy numbers

    Gligorić Zoran, Beljić Čedomir, Gluščević Branko, Jovanović Saša (2011)

  • Production information system of the Pljevlja coal mine

    Božo Kolonja, Ranka Stanković, Filip Vuković (2018)

  • New Language Models for South Slavic Languages

    Mihailo Škorić (2024)
    Izlaganje će predstaviti izazove i perspektive modelovanja južnoslovenskih jezika, sa posebnim osvrtom opšte jezičke modele građene na arhitekturi transformera (BERT, GPT), na dostupne skupove tekstova za obučavanje tih modela, te kvantitet i kvalitet tih skupova. Izlaganje će ponuditi pregled dostupnih skupova i modela, dok će posebna pažnja biti posvećena najnovijim korpusima tekstova. Prvi korpus, Kišobran, predstavlja krovni veb korpus južnoslovenskih jezika i ujedno trenutno najveći korpus tekstova na našim prostorima koji broji preko osamnaest milijardi reči i uključuje sve ...
    veliki korpusi teksta, jezički modeli, južnoslovenski jezici

  • Integrating landslide magnitude in the susceptibility assessment of the City of Doboj, using machine learning and heuristic approach

    Cvjetko Sandić, Miloš Marjanović, Biljana Abolmasov, Radislav Tošić (2023)
    In this work, landslide assessment of the Doboj City area was modeled by combining machine learning and heuristic tools. The machine learning part was used to map the Morphometric factor. i.e. probability of landslides based on relation between the magnitude of events and morphometric parameters: elevation, distance to streams, slope, profile curvature, and aspect. The Random Forest and Support Vector Machines algorithms were implemented in the learning protocol, which included several strategies: balancing of the training/testing set size, algorithm ...
    podložnost na kliženje, magnituda klizišta, mašinsko učenje, heuristički pristup, Doboj