2738 items

• 

  Human factor risk management procedures applied in the case of open pit mine cite

  Snežana Kirin, Aleksandar Sedmak, Wei Li, Miodrag Brzaković, Igor Miljanović, Ana Petrović, Simon Sedmak (2021)

  Risk management aims to provide a controlled work environment to ensure the safe operation of the high-risk systems. It is a dynamic process which work in a continual state of change. The issue of human factor risk and rules and regulations in open pit mine is a main focus of this paper in order to develop predictive models of behavior of workers in relation to compliance with the procedures and rules. Presented survey was conducted in open pit coal ...

  Upravljanje rizikom, ljudski faktor, bager sa kašikom, metod konačnih elemenata

  Snežana Kirin, Aleksandar Sedmak, Wei Li, Miodrag Brzaković, Igor Miljanović, Ana Petrović, Simon Sedmak. "Human factor risk management procedures applied in the case of open pit mine" in Engineering Failure Analysis (2021). https://doi.org/https://doi.org/10.1016/j.engfailanal.2021.105456

• 

  Развој алгоритма процене ефеката ризика рада рударских машина на бази фази алгебре cite

  Dejan V. Petrović (2014-12-30)

  Појава изненадних отказа елемената техничких система у рударству је свакодневна појава...

  ризик, поузданост, технички систем, рударске машине, отказ, фази скупови, фази логика

  Dejan V. Petrović. "Развој алгоритма процене ефеката ризика рада рударских машина на бази фази алгебре" in Универзитет у Београду, Универзитет у Београду, Рударско-геолошки факултет (2014-12-30)

• 

  Productivity improvement with use of beam gas compressor: pilot test in Southeastern Europe mature field cite

  Bojan Martinović, Dušan Danilović, Branko Grubač, Robert Fadiga (2022)

  Most of the wells in the oilfield Turija are operating with sucker rod pumps, where casing pressure at around 15 bar, and with marginal production rates. The high value of casing pressure indicates high pressure on the face of the formation and depends directly on well productivity. In addition, with increasing value of the casing pressure gas column in the annulus is moving the dynamic fluid level near pump intake and more gas is entering the pump, it results ...

  beam gas compressor, BGC, increase productivity, sucker rod pump, SRP, mature field, artificial lift, production optimisation

  Bojan Martinović, Dušan Danilović, Branko Grubač, Robert Fadiga. "Productivity improvement with use of beam gas compressor: pilot test in Southeastern Europe mature field" in International Journal of Oil Gas and Coal Technology (2022)

• 

  Effectiveness Analysis of Different Bucket-wheel Excavators cite

  Stevan Đenadić, Predrag Jovančić, Dragan Ignjatović, Miloš Tanasijević, Filip Miletić (2021)

  Coal production in open-pit lignite mines in the Republic of Serbia is performed with continuous work systems. In addition to coal production, the same systems are used for the exploitation of large quantities of overburden. According to the reliability concept, continuous systems are in linear connection. If the failure occurs in one part of the system, that will produce a downtime of the entire system. The initial and most important factor of continuous systems is the bucket-wheel excavator. It ...

  bucket-wheel excavator, open-pit coal mine, mining, multi-criteria decision methods

  Stevan Đenadić, Predrag Jovančić, Dragan Ignjatović, Miloš Tanasijević, Filip Miletić. "Effectiveness Analysis of Different Bucket-wheel Excavators" in 8th International Conference Mining and Environmental Protection, Sokobanja, 22-25 September 2021, University of Belgrade, Faculty of Mining and Geology, Belgrade, Serbia (2021)

• 

  Konstitutivne zavisnosti komunalnog otpada sa deponija u Srbiji cite

  Dragoslav Rakić (2013-05-10)

  U disertaciji su prikazani rezultati laboratorijskih ispitivanja uzoraka komunalnogotpada dobijeni u aparatima za direktno smicanje i edometarskim aparatima (jedanedometarski aparat konstruisan je za potrebe ove disertacije). Sva ispitivanja su izvršenana veštački pripremljenim uzorcima, uz uvažavanje preporuka koje se odnose nadimenzije korišćenih aparata i veličinu najvećih frakcija u uzorku (EN 1997-2, ASTM2007-a, 2007-b). Za formiranje uzoraka korišćen je komunalni otpad različite starosti,uzet sa dve deponije u Srbiji (Ade Huje u Beogradu i gradske deponije u Novom Sadu).Interpretacija rezultata dobijenih iz ...

  komunalni otpad, deponija, geotehnička klasifikacija, čvrstoća smicanja,deformabilnost, indeks primarne kompresije, indeks sekundarne kompresije, modelisleganja

  Dragoslav Rakić. "Konstitutivne zavisnosti komunalnog otpada sa deponija u Srbiji" in Универзитет у Београду, Универзитет у Београду, Рударско-геолошки факултет (2013-05-10)

• 

  A Fuzzy Expert Model for Availability Evaluation cite

  Dejan Ivezić, Miloš Tanasijević, Predrag Jovančić, Radiša Đurić (2019)

  Each technical system within itself carries the great potential danger of possible occurrence of failure and damages. Mining machines are characteristic by great investment values, costs of unplanned shutdowns, complex working conditions, and environment and workers hazards. Systematic monitoring of the mining machinery is of great importance for the management of the mining companies. Availability is the overall concept of quality of service. Includes information regard to operating state, an idle state, a standby state and shut down. The ...

  raspoloživost, ekspertski sistem, fazi teorija, buldozeri

  Dejan Ivezić, Miloš Tanasijević, Predrag Jovančić, Radiša Đurić. "A Fuzzy Expert Model for Availability Evaluation" in Proceedings of the 2019 20th International Carpathian Control Conference (ICCC), AGH University of Science and Technology, Kraków - Wieliczka, Poland (2019)

• 

  Applicability of the risk ranking methodology designed for water reservoirs to tailings storage facilities cite

  Dragana Nišić, Dinko Knežević, Aleksandar Cvjetić, Neda Nišić, Vladimir Jovanović (2022)

  The risks associated with operating water reservoirs and tailings storage facilities (TSFs) are different because of their different purposes, methods of construction and operation, and characteristics of the materials impounded and their flow behaviour. Regardless of the differences, these two types of structures are often put in the same category when it comes to risk assessment and the application of relevant methodologies, which may result in unrealistic outcomes. In this paper we investigate whether it is possible to apply ...

  procena rizika, akumulacije za vodu, jalovište, TSF, ICOLD, FMEA

  Dragana Nišić, Dinko Knežević, Aleksandar Cvjetić, Neda Nišić, Vladimir Jovanović. "Applicability of the risk ranking methodology designed for water reservoirs to tailings storage facilities" in Journal of the Southern African Institute of Mining and Metallurgy (2022). https://doi.org/10.17159/2411-9717/1492/2022

• 

  Развој модела употребног квалитета помоћне механизације на површинским коповима лигнита cite

  Драгица Јагодић Крунић (2021)

  Тренутно стање помоћне механизације на површинским коповима лигнита је незадовољавајуће узроковано пре свега старошћу и неблаговременом заменом машима услед чега је расположивост недовољна а трошкови експлоатације и одржавања високи. Тренутно стање и захтеви који се постављају пред ове машине указују на неопходност оптимизације процеса управљања помоћном механизацијом. Одређивање оптималног времена замене и преосталих могућности је најодговорнији управљачки задатак који треба да буде заснован на свеобухватном сагледавању економских, техничких и других узрочно последичних веза. Са економског аспекта гледано треба одржавати ...

  помоћна механизација, употребни квалитет, ефективност, расположивост, сигурност функционисања, ризик, трошкови животног циклуса, фази логика, Монте Карло метода

  Драгица Јагодић Крунић. Развој модела употребног квалитета помоћне механизације на површинским коповима лигнита, Београд : [Д. Јагодић Крунић], 2021

• 

  Applying the Fuzzy Inference Model in Maintenance Centered to Safety: Case Study – Bucket Wheel Excavator cite

  Predrag Jovančić, Miloš Tanasijević, Vladimir Milisavljević, Aleksandar Cvjetić, Dejan Ivezić, Uglješa Bugarić (2020)

  Predrag Jovančić, Miloš Tanasijević, Vladimir Milisavljević, Aleksandar Cvjetić, Dejan Ivezić, Uglješa Bugarić. "Applying the Fuzzy Inference Model in Maintenance Centered to Safety: Case Study – Bucket Wheel Excavator" in Applications and Challenges of Maintenance and Safety Engineering in Industry 4.0 , Pennsylvania : IGI Global (2020). https://doi.org/10.4018/978-1-7998-3904-0

• 

  Konstitutivne zavisnosti komunalnog otpada sa deponija u Srbiji cite

  Dragoslav Rakić (2013-05-10)

  U disertaciji su prikazani rezultati laboratorijskih ispitivanja uzoraka komunalnogotpada dobijeni u aparatima za direktno smicanje i edometarskim aparatima (jedanedometarski aparat konstruisan je za potrebe ove disertacije). Sva ispitivanja su izvršenana veštački pripremljenim uzorcima, uz uvažavanje preporuka koje se odnose nadimenzije korišćenih aparata i veličinu najvećih frakcija u uzorku (EN 1997-2, ASTM2007-a, 2007-b). Za formiranje uzoraka korišćen je komunalni otpad različite starosti,uzet sa dve deponije u Srbiji (Ade Huje u Beogradu i gradske deponije u Novom Sadu).Interpretacija rezultata dobijenih iz ...

  komunalni otpad, deponija, geotehnička klasifikacija, čvrstoća smicanja,deformabilnost, indeks primarne kompresije, indeks sekundarne kompresije, modelisleganja

  Dragoslav Rakić. "Konstitutivne zavisnosti komunalnog otpada sa deponija u Srbiji" in Универзитет у Београду, Универзитет у Београду, Рударско-геолошки факултет (2013-05-10)

• 

  Determination of Mechanical Properties of Altered Dacite by Laboratory Methods cite

  Veljko Rupar, Vladimir Čebašek, Vladimir Milisavljević, Dejan Stevanović, Nikola Živanović (2021)

  This paper presents a methodology for determining the uniaxial and triaxial compressive strength of heterogeneous material composed of dacite (D) and altered dacite (AD). A zone of gradual transition from altered dacite to dacite was observed in the rock mass. The mechanical properties of the rock material in that zone were determined by laboratory tests of composite samples that consisted of rock material discs. However, the functional dependence on the strength parameter alteration of the rock material (UCS, intact ...

  Geology, Geotechnical Engineering, Engineering Geology

  Veljko Rupar, Vladimir Čebašek, Vladimir Milisavljević, Dejan Stevanović, Nikola Živanović. "Determination of Mechanical Properties of Altered Dacite by Laboratory Methods" in Minerals, MDPI AG (2021). https://doi.org/10.3390/min11080813

• 

  Development and Application of Methodology for Quantification of Overbreaks in Hard Rock Tunnel Construction cite

  Zoran Berisavljević, Dragoljub Bajić, Vojkan Jovičić (2023)

  A methodology for determining overbreaks in hard rock tunnel construction using the drill-and-blast technique is presented in this paper. The methodology was developed for and applied to crystalline medium- to thick-bedded limestone, but it can be used in any jointed hard rock mass. Overbreaks are inevitable in hard rock tunnelling in a low-confinement environment (shallow tunnels up to several hundred meters deep) as a result of wedge failures along unfavourably oriented discontinuities caused by blasting. It is widely accepted ...

  hard rock, drill-and-blast, geological overbreak, technological overbreak, stability criterion, discontinuity orientation, tunnel construction

  Zoran Berisavljević, Dragoljub Bajić, Vojkan Jovičić. "Development and Application of Methodology for Quantification of Overbreaks in Hard Rock Tunnel Construction" in Applied Sciences, MDPI (2023). https://doi.org/10.3390/app13031379

• 

  Дефинисање механичких својстава алтерисаног стенског материјала лабораторијским методама cite

  Вељко М. Рупар (2022)

  Основни циљ овог рада је да представи методологију одређивања механичких својстава хетерогеног стенског масива који изграђују дацит (Д) и алтерисани дацит (АД), где је уочена је зона постепеног преласка од алтерисаног дацита до дацита. Механичка својства стенског масива у тој зони утврђена су на основу лабораторијских испитивања једноосне и троосне чврстоће на притисак стенског материјала композитних узорака. Композитни узорци су се састојали од дискова стенског материјала, при чему је висина дискова h дефинисала различити процентуални удео појединог стенског материјала, ...

  дацит, алтерисани дацит, једноосна чврстоћа на притисак, троосна чврстоћа на притисак, композитни узорци, механика стена, стабилност косина

  Вељко М. Рупар. Дефинисање механичких својстава алтерисаног стенског материјала лабораторијским методама, Београд : [В. Рупар], 2022

• 

  Simulation of the operating regime and determination of the radius of influence of the groundwater sources „Parmenac“ and „Beljina“ (Čačak) cite

  Polomčić Dušan, Bajić Dragoljub, Močević Jelena, Špadijer Slavko, Drašković Dejan (2016)

  Polomčić Dušan, Bajić Dragoljub, Močević Jelena, Špadijer Slavko, Drašković Dejan. "Simulation of the operating regime and determination of the radius of influence of the groundwater sources „Parmenac“ and „Beljina“ (Čačak)" in Proceedings of the XV Serbian Symposium on Hydrogeology, Belgrade:University of Belgrade - Faculty of mining and geology (2016): 141-146

• 

  Assessments of effects of implementation of strategic plans for development of Belgrade District heating system cite

  Dejan Ivezić, Marija Živković, Aleksandar Madžarević, Miodrag Grujić (2020)

  The district heating system (DHS) is one of the key elements of the Belgrade energy system. Overview of the current state and basic characteristics of the DHS are presented in this paper. The focus is on the planned development of DHS and on the analyses of effects of realization of measures and projects defined by strategic documents related to DHS which are adopted by city authorities (Development Strategy of DHS and Strategy of Belgrade Development). Two exploratory scenarios were ...

  Daljinsko grejanje, LEAP, Primarni energetski faktor, Uvozna zavisnost, CO2 emisija

  Dejan Ivezić, Marija Živković, Aleksandar Madžarević, Miodrag Grujić. "Assessments of effects of implementation of strategic plans for development of Belgrade District heating system" in Sustainable Cities and Society, Elsevier BV (2020). https://doi.org/10.1016/j.scs.2020.102304

• 

  Data from the Digital Repository of the Faculty of Mining and Geology in eScience (eNauka) cite

  Biljana Rujević, Mihailo Škorić (2024)

  The paper describes linking the Digital Repository of the University of Belgrade, Faculty of Mining and Geology, with the eScience system in terms of transferring metadata about the results of researchers' scientific work. The steps taken to ensure a smooth harvesting of metadata are outlined. Additionally, a presentation of additional improvements to the OAI system is provided, aiming to contribute to the automatic linking of authors with their results in the eScience system.

  репозиторијуми, еНаука, метаподаци, Рударско-геолошки факултет

  Biljana Rujević, Mihailo Škorić. "Data from the Digital Repository of the Faculty of Mining and Geology in eScience (eNauka)" in Infotheca, Faculty of Philology, University of Belgrade (2024). https://doi.org/10.18485/infotheca.2023.23.2.4

• 

  The importance of preserving the collection of rocks and minerals at the Faculty of mining and geology cite

  Alena Zdravković, Vesna Matović (2017)

  Alena Zdravković, Vesna Matović. "The importance of preserving the collection of rocks and minerals at the Faculty of mining and geology" in XVIII Universeum network meeting, Mobility of University Heritage, Book of Abstracts, University of Belgrade: (2017): 63-63

• 

  The Use of the Omeka Semantic Platform for the Development of the University of Belgrade, Faculty of Mining and Geology Digital Repository cite

  Petar Popović, Mihailo Škorić, Biljana Rujević (2021)

  Under the regulations of the Ministry of Education, Science and technological Development, a digital repository based on the Omeka S data storage platform has been developed for the Faculty of Mining and Geology. The platform has been upgraded with the required modular extensions, Solr index and automatic OCR. Furthermore, document indexing and search have been fine-tuned with the aid of e-dictionaries of the Serbian language, which has brought about outstanding results in terms of usage facilitation and overall ...

  Дигитални репозиторијум, Омека, претрега дигиталних библиотека

  Petar Popović, Mihailo Škorić, Biljana Rujević. "The Use of the Omeka Semantic Platform for the Development of the University of Belgrade, Faculty of Mining and Geology Digital Repository" in Infotheca, Faculty of Philology, University of Belgrade (2021). https://doi.org/10.18485/infotheca.2020.20.1_2.9

• 

  Methodology of Geotechnical Investigation of Terrain for Road Design and Construction in Bendel State of Nigeria cite

  Henry N. Erebor (1980)

  Geotechnical investigation, methodology, road design, Nigeria

  Henry N. Erebor. Methodology of Geotechnical Investigation of Terrain for Road Design and Construction in Bendel State of Nigeria, Faculty of Mining and Geology, 1980

• 

  The occurrence of iron mineralization in vicinity of Ostenjak (Aranđelovac), Serbia cite

  Pantelić Nemanja, Kostić Bojan, Vulić Predrag (2016)

  Pantelić Nemanja, Kostić Bojan, Vulić Predrag. "The occurrence of iron mineralization in vicinity of Ostenjak (Aranđelovac), Serbia" in Third Congress of Geologists of Republic of Macedonia Third Congress of Geologists of Republic of Macedonia 2 (2016): 619