Претрага

Упит dcterms_subject_txt:Industrial and Manufacturing Engineering

2397 items

  • Estimating hydraulic parameters for the complex hydrodynamic models

    Dušan Polomčić, Dragoljub Bajić, Jelena Ratković, Bojan Hajdin (2018)
    Hydrodynamic models have usually been calibrated manually, by trial-and-error, with different values of hydraulic parameters and hydraulic characteristics of boundary conditions. This method of calibration and estimation of hydraulic parameters requires an extensive knowledge and experience of experts, but whether the resulting solution includes an optimal set of parameters still remains an open question. An optimization method founded upon the Gauss-Marquardt-Levenberg algorithm, along with PEST software based on that algorithm, introduces automation of model calibration with regularization, which substantially ...
    kalibracija, optimizacija, PEST, koeficijent filtracije

  • Analysis of the correlation between modified secondary and primary compression index on the example of old municipal waste in Serbia

    Dragoslav Rakić, Irena Basarić Ikodinović, Jovana Janković, Tina Đurić (2022)
    The paper presents the results related to the determination of the index of primary and maximum and minimum indices of secondary compression, i.e. modified primary and secondary compression indices (Cc, Cc', C'min, C'max), obtained by laboratory testing of artificially prepared municipal waste samples (three series of 9 samples in total) in an oedometer apparatus with a diameter of 20 cm. Old municipal waste was used, which was taken from two landfills in Serbia, one that is ...
    municipal solid waste, secondary compression index, ratio of modified secondary and primary compression index

  • The rational technology model selection of the underground drivage development for the given conditions

    Tokalić Rade, Vidanović Nebojša, Savić Ljubinko (2013)

  • INVENTS: A Hybrid Mine Ventilation Planning and Design System

    Lilić Nikola, Stanković Ranka, Obradović Ivan (2013)
    Ventilation system analysis is a complex process based on the calculation and analysis of numerous parameters. These problems can be successfully solved by the SimVent numerical package, but a full understanding and use of the obtained results require the involvement of an experienced specialist in the ventilation field. The solution was found in the creation of a hybrid system INVENTS, whose knowledge base represents a formalization of the expert knowledge in the mine ventilation field. In this paper we ...
    hybrid systems, mine ventilation, expert systems
    ... improves the reliability and quality of the apprehension and verification of air amounts needed for the ventilation of workplaces. Beforehand, determination of air amounts relied on the engineering experience or an analogy with similar examples in encountered in practice and specific empirical relations ...
    ... Expert Systems, Design and Development, Macmillan Publishing Company, New York, 1994. [3] Hartman,H., (ed.), SME Mining Engineering Handbook, Society for Mining, Metallurgy, and Exploration, Inc. Littleton, Colorado, 2nd Ed. Vol.1., 1992. [4] Kowalik,J.S., (ed.), Coupling Symbolic and Numerical Computing ...
    ... into the knowledge base, thus upgrading existing mathematical models with knowledge acquired through engineering practice. Implementation and maintenance System monitoringDesign Evaluation and modification Data acquisition System planing Fig. 1. Component diagram of the novel design concept ...

  • Correlation of uniaxial compressive strength with the dynamic elastic modulus, p –wave velocity and s –wave velocity of different rock types

    Jelena Majstorović, Miloš Gligorić, Suzana Lutovac, Milanka Negovanović, Luka Crnogorac (2019)
    Knowing mechanical properties of rocks incorporated with ultrasonic waves velocities investigations provide a secure basis for mine modelling. Uniaxial compressive strength, dynamic elastic modulus and ultrasonic waves velocities are just some of the rock properties that indicate on presence of discontinuities, stratification and fissures of rocks. Determining the relationship of these rock properties testing the rock samples that are corresponding to different rock types extracted from different mineral deposits represents the core of this study. In this paper, we ...
    линеарна регресија, метода најмањих квадрата, динамички модул еластиности, брзина уздужних таласа

  • INVENTS: a hybrid system for subsurface ventilation analysis

    Nikola Lilić, Ranka Stanković, Ivan Obradović (2000)
    Ventilation system analysis is a complex process based on the calculation and analysis of numerous parameters. These problems can be successfully solved by the SimVent numerical package, but a full understanding and use of the obtained results require the involvement of an experienced specialist in the ventilation field. The solution was found in the creation of a hybrid system INVENTS, whose knowledge base represents a formalization of the expert knowledge in the mine ventilation field. In this paper we ...
    ... improves the reliability and quality of the apprehension and verification of air amounts needed for the ventilation of workplaces. Beforehand, determination of air amounts relied on the engineering experience or an analogy with similar examples in encountered in practice and specific empirical relations ...
    ... Expert Systems, Design and Development, Macmillan Publishing Company, New York, 1994. [3] Hartman,H., (ed.), SME Mining Engineering Handbook, Society for Mining, Metallurgy, and Exploration, Inc. Littleton, Colorado, 2nd Ed. Vol.1., 1992. [4] Kowalik,J.S., (ed.), Coupling Symbolic and Numerical Computing ...
    ... into the knowledge base, thus upgrading existing mathematical models with knowledge acquired through engineering practice. Implementation and maintenance System monitoringDesign Evaluation and modification Data acquisition System planing Fig. 1. Component diagram of the novel design concept ...

  • Correlation Between Dynamic CBR and Compaction and Bearing Capacity of Pavement Foundation Layers

    Milan Bogdanović, Snežana Bogdanović, Dragoslav Rakić, Irena Basarić Ikodinović (2024)
    This paper presents a dynamic California Bearing Ratio (CBRd) device that can be used on a prepared pavement foundation layer to obtain a certain parameter of the tested material in the laboratory and in situ in a direct and fast way. For the selected natural material (gravel), it is shown that the laboratory CBRd can be used to estimate the compaction and bearing capacity, because it correlates well with the parameters of the standard and modifed Proctor compaction tests. ...
    korelacija parametara, donji slojevi saobraćajnica, laboratorijska i terenska ispitivanja, dinamički kalifornijski indeks nosivosti CBRd
    ... of Belgrade Faculty of Mining and Geology archives faculty publications available in open access, as well as the employees' publications. - The Repository is available at: www.dr.rgf.bg.ac.rs DO!I 10.1007/511204-024-09939-x Soil Mechanics and Foundation Engineering, Vol. 61, No. 1, March, 2024 (Russian ...
    ... Capacity of Pavement Foundation Layers | Milan Bogdanović, Snežana Bogdanović, Dragoslav Rakić, Irena Basarić Ikodinović | Soil Mechanics and Foundation Engineering | 2024 | | 10.1007/s11204-024-09939-x http://dr.rgf.bg.ac.rs/s/repo/item/0008686 Дигитални репозиторијум Рударско-геолошког факултета ...
    ... ]. Sulewska, “Dynamic CBR as a method of embankment assessment,” Proc. 18% International Conference on Soil Mechanics and Geotechnical Engineering, Paris (2015). Forschungsgesellschaft fur Strafšen - und Verkehrswesen, “Prifverfahren zur Bestimmung des CBR-Wertes (California bearing ratio),” in: Technische ...

  • Different aspects of soft computing methods application for blasting in mining

    Katarina Urošević, Jelena Zakonović, Radmila Gaćina (2019)
    Mining is a global industry that is of great importance for every product which is used by human. For mining, process efficiency, reducing production downtime, increasing profitability are all very important. Soft computing tehnologies (SC) are helping in the process of transforming the mining industry into a safer and more environmental friendly industry, but keeping in mind the financial aspect as well. In this paper some of fields of blasting activities in which the SC methods have been applicated, ...
    soft computing, blasting, fuzzy logic, neural networks

  • Phase relations and physical indicators of municipal waste from old landfills in Serbia

    Dragoslav R Rakić, Irena G Basarić Ikodinović, Jovana M Janković, Tina D Đurić (2021)
    Due to certain similarities of municipal waste and soil, usually for the determination of basic parameters of physical state, laboratory and field tests which are common in geotechnical investigations are used. It is often to construct an apparatus for special purpose to perform some specific laboratory and field tests. Therefore, different values of indicators of municipal waste physical state can be found in the literature. The basic reasons should be found in different definitions and methods that researchers use ...
    municipal waste, moisture content, unit weight, specific gravity, grain size distribution, porosityGeneral Computer Science
    ... 24-39. 5) Huat, B.K. (2004): Organic and Peat Soils Engineering, Serdang: University Putra Malaysia Press,146. 6) Kaniraj, S.R..Joseph, R.R. (1996):Geotechnical behavior of organic soils of North Sarawak, 4" International Conference on Sofi Soil Engineering, Vancouver, Canada, 267-274. 7) Machado ...
    ... waste, Jourmal of Geotechnical and Geoenvironmental Engineering, ASCE, 132(10), 1250-1261. 6) Zornberg J.G., Jernigan B.L., Sanglerat T.R., Cooley B.H. (1999): Retention of free liquids in landfills undergoing vertical expansion, Jowmmal of Geotechnical — and Geoenvironmental Engineeringč ...
    ... Francis Group, Torino, taly, 347-354. 1) Rakić D., Basarić I, Berisavljević Z., Berisavljević D. (2016):Geotechnical characteristics of industrial waste slag and sludge from Smederevo steel mill, Serbia. J Knviron Prot Ecol,17(2), 512-522. 2) Rakić D.,Basarić l., Čaki L., Ćorić, S. (2018):Contribution ...

  • Comprehensive Profiling of Microbiologically Induced CaCO3 Precipitation by Ureolytic Bacillus Isolates from Alkaline Soils

    Olja Šovljanski, Lato Pezo, Jovana Stanojev, Branimir Bajac, Sabina Kovač, Elvira Tóth, Ivan Ristić, Ana Tomić, Aleksandra Ranitović, Dragoljub Cvetković, Siniša Markov (2021)
    MICP process, kinetic study, calcite, vaterite, MALDI-TOF identification, Bacillus licheniformis, Sporosarcina pasteurii
    ... the desired amount and characteristics of CaCO3 precipitate in variable environmental conditions, offers potential for high-efficiency processes in different fields such as civil engineering, bioremediation, and biotechnological applications, geotechnical and ecological engineering, bio-based solution ...
    ... rivers, streams, wetlands, and even groundwater and saline habitats has been related to the formation of different minerals around living cells under varied environmental conditions. Due to this fact, these bacteria represent resourceful bioagents for engineering approaches, and consequently, microbiologically ...
    ... rivers, streams, wetlands, and even groundwater and saline habitats has been related to the formation of different minerals around living cells under varied environmental conditions. Due to this fact, these bacteria represent resourceful bioagents for engineering approaches, and consequently, microbiologically ...

  • Control of substructure construction of railways in the Republic of Serbia

    Dragan Lukić, Dragoslav Rakić, Irena Basarić Ikodinović (2022)
    Контрола збијености природног тла (у ископу) или збијеног у насипу при изградњи саобраћајница представља један од основних облика контроле квалитета доњег строја. Код изградње брзих саобраћајница (аутопутеви и брза железница) приоритет је постизање високог нивоа контроле извршених радова. У циљу онемогућавања диференцијалног слегања (при изградњи насипа), или промене запремине услед допунског збијања материјала, које неминовно доводе до деформација, потребно је извршити оптимално збијање материјала. У оквиру овог рада приказује се техничка регулатива која регулише контролу збијености при изградњи железничке ...
    доњи строј, техничка регулатива, насип, збијеност, контрола
    ... railways, and especially on the construction of a large number of industrial tracks for the economy needs. Almost as a rule, the control of embankment construction is performed only by determining the dynamic deformation modulus Evd, and without determining the degree of compaction Dpr and determining ...
    ... International conference Geotechnical aspects of Construction, 2005, pp. 469-472. [6] Ljubojev, ’’Filter rules for soil and geosynthetics,’’ Mining and Metallurgy Engineering Bor, No. 1-2, pp. 1-12, 2021. ...
    ... soil types 40 35 t r u c t Regional railway 1,00 100 U>15 45 0,97 60 GU,GP,GW, GF,SP,SW all other soil types 35 30 i o n Local railway and industrial rails 0,97 80 U>15 40 0,95 45 GU,GP,GW, GF,SP,SW all other soil types 30 25 M a i n t e E x i s t i V >160 km/h 0,97 80 U>15 40 0,95 45 ...

  • Unusually sluggish microemulsion system with water, toluene and a technical branched alkyl polyethoxylate

    Marija Ilić, Franz-Hubert Haegel, Vesna Pavelkić, Snežana Zlatanović, Zoran Marković, Aleksandar Cvjetić (2015)
    Microemulsion systems with water, toluene and nonionic surfactants are interesting for application due to the excellent solvent properties of aromatic hydrocarbons. In this study, the pseudo-binary phase diagram (“fish-diagram”) of such a ternary system was investigated using a branched technical alkyl polyethoxylate. Lutensol ON 50 (i-C10E5) was considered a suitable surfactant. The system with technical branched i-C10E5 exhibits very long, and for compositions near optimum solubilization, i.e., the minimum content of surfactant needed for a bicontinuous microemulsion, extremely long ...
    микроемулзија, толуен, оксоалкохол етоксилат, термодинамичка стабилност, тернарни фазни дијаграми, дијаграми „fish“

  • Application of Peleg model on mass transfer kinetics during osmotic dehydratation of pear cubes in sucrose solution

    Vesna Pavelkić, Tanja Brdarić, Marija Petrović, Gavrilo Šekularac, Milica Košević, Lato Pezo, Marija Ilić (2015)
    The applicability of Peleg model was investigated for predicting mass transfer kinetics during the osmotic dehydration (OD) process of pears, at different concentrations (40, 60 and 70%, w/w) and temperatures (20, 35 and 50 °C) of sucrose solution. Increase in sucrose solution concentration resulted in higher water loss (WL) and solid gain (SG) values through the osmotic treatment period. After 360 min of osmotic treatment of pears, WL ranged from 23.71 to 31.68% at 20 °C, from 24.80 to ...
    осмотска дехидрација, крушкa, кинетика, температурни ефекат, Пелег модел

  • BEYOND 2020 - Geology explorations and open pit activities affectation in reclamation designing in Kolubara Coal Mines (KCM) Serbia, new considerations

    Bojan Dimitrijević, Bogoljub Vučković, Radmila Gaćina (2023)
    Geology explorations in KCM runs from 1936. year up to these days and still ongoing. Results in >7,200 drill holes with ≈600,000 m of core drilling and gave lignite ore resources of > 4,1Bt, which 1,15Bt are excavated since 1986. of XIX up to early years of XXI century. For further mining operations in open pits stay 1,5Bt of lignite. Under waste heaps are ≈80 km2, additional 85 km2 should be filled. All of that masses/areas were, are ...

  • Late Triassic radiolarians from the Grivska formation, internal Dinarides, SW Serbia

    Nikita Bragin, Liubov Bragina, Nevenka Đerić, Nataša Gerzina-Spajić (2019)
    Paleontology, Stratigraphy, Economic Geology, Geochemistry and Petrology, Geology, Geophysics, Geotechnical Engineering and Engineering Geology
    ... d Ladinian, Carnian and Norian cherty limestones using conodont dating, but these data were rarely used in geological studies, and the Grivska For- mation was defined and mapped mostly on the base ofits macroscopic lithological attributes, without bios- tratigraphic and detailed microfacies ...
    ... with calcite veins and with common lay- ers and nodules of white and pink cherts. Thin-platy limestones (with thickness of layers less than 10 cm) are predominant, while the beds with thickness of more than 0.5 m are represented by massive grey lime- Table 1. Presence and abundance of radiolarian ...
    ... Integrated ammonoid, conodont and radiolarian zonation ofthe Triassic and some remarks to stage/substage subdivision and the numeric age of the Triassic stages. Albertiana, 28: 57–83. MISSONI, S., GAWLICK, H.-J., SUDAR, M.N., JOVANović, D. & LEIN, R. 2012. Onset and demise of the Wetterstein Carbon- ...

  • Strategic Environmental Assessment in the Application of Preventive Protection for Wind Farm Noise—Case Study: Maestrale Ring Wind Farm

    Boško D. Josimović, Aleksandar Cvjetić, Božidar Manić (2021)
    Determining the spatial position of wind turbines is the initial and most important phase in the development of a wind farm project. In this sensitive phase, all potential problems that may arise in the later stages of project development should be prevented by means of spatial and urban planning instruments. This makes it possible to achieve maximum use of the potential of wind in a particular space and, thus, fulfil the technical and economic requirements of the project while ...
    Energija,energetski inženjering i elektroenergetska tehnologija,obnovljivi izvori energije, održivost i životna sredina,električni i elektronski inženjering,kontrola i optimizacija,inženjering
    ... 60 50 5 Town/city center, business, administrative zone with apartments, zones along highways and roads 65 55 6 Industrial, storage and service areas and transport terminals without residential buildings At the border of this zone, the noise must not exceed the limit value in the zone with ...
    ... flex- ible in relation to various precise models and tools used in environmental engineering and other areas based on scientific postulates of environmental impact assessment (EIA) [50– 53], the challenge was to select the appropriate techniques and methodology for assess- ment in the SEA process ...
    ... institutional; education 55 45 Industrial, commercial 70 70 Table 4. Excerpt from the table “SEA objectives and indicators” related to noise. (Source: SEA for the Urban Plan of the Maestrale Ring wind farm). Zone Purpose of the Space Noise Level, LAeq (dB) Day and Evening (Guidelines for Community ...

  • Size–strain line-broadening analysis of anatase/brookite (TiO<sub>2</sub>)-based nanocomposites with carbon (C): XRPD and Raman spectroscopic analysis

    Aleksandar Kremenović, Mirjana Grujić-Brojčin, Nataša Tomić, Vladimir Lazović, Danica Bajuk-Bogdanović, Jugoslav Krstić, Maja Šćepanović (2022)
    A size-strain line-broadening analysis of the XRPD patterns and Raman spectra for two anatase/brookite (TiO2)-based nanocomposites with carbon (C) was carried out and the results compared with those of a similar sample free of carbon. The crystal structures and microstructures of anatase and brookite, as well as their relative abundance ratio, have been refined from XRPD data by the Rietveld method (the low amount of carbon is neglected). The XRPD size-strain analysis resulted in reliable structure and microstructure results ...
    Materials Chemistry, Metals and Alloys, Atomic and Molecular Physics, Optics, Electronic, Optical and Magnetic Materials

  • Managing mining project documentation using human language technology

    Aleksandra Tomašević, Ranka Stanković, Miloš Utvić, Ivan Obradović, Božo Kolonja (2018)
    Purpose: This paper aims to develop a system, which would enable efficient management and exploitation of documentation in electronic form, related to mining projects, with information retrieval and information extraction (IE) features, using various language resources and natural language processing. Design/methodology/approach: The system is designed to integrate textual, lexical, semantic and terminological resources, enabling advanced document search and extraction of information. These resources are integrated with a set of Web services and applications, for different user profiles and use-cases. Findings: The ...
    Digital libraries, Information retrieval, Data mining, Human language technologies, Project documentation

  • Application of MCDA in the determination of optimal block size for open-pit modelling and mine planning

    Petar Marković, Dejan Stevanović, Milica Pešić Georgiadis, Mirjana Banković (2021)
    The process of creating a geological block model as the basis for a further detailed design and planning of mining operations is a very responsible task. Errors made during this initial process are transferred to all other phases of the mining project. Certainly, one of the most important decisions for the modelling process is the choice of the appropriate size of the blocks that form the model itself. The determination of the optimal block size is not a simple ...
    dimenzije minibloka, višekriterijumska analiza, AHP, modeliranje ležišta, planiranje na površinskim kopovima

  • Development and Application of Methodology for Quantification of Overbreaks in Hard Rock Tunnel Construction

    Zoran Berisavljević, Dragoljub Bajić, Vojkan Jovičić (2023)
    A methodology for determining overbreaks in hard rock tunnel construction using the drill-and-blast technique is presented in this paper. The methodology was developed for and applied to crystalline medium- to thick-bedded limestone, but it can be used in any jointed hard rock mass. Overbreaks are inevitable in hard rock tunnelling in a low-confinement environment (shallow tunnels up to several hundred meters deep) as a result of wedge failures along unfavourably oriented discontinuities caused by blasting. It is widely accepted ...
    hard rock, drill-and-blast, geological overbreak, technological overbreak, stability criterion, discontinuity orientation, tunnel construction