Претрага

Упит dcterms_subject_txt:open-cast mine

403 items

  • Coal homogenization stockyard sizing “Tamnava – Zapad” case study

    Božo Kolonja, Dinko Knežević, Ranka Stanković, Dejan Stevanović, Detlef Trummer (2016)
    ... Process at Open-Pit Stockyards: A Northern Kazakhstan Mining Company Case Study. In Mine Planning and Equipment Selection (pp. 1017-1027). Springer International Publishing. 8. Stevanović D., Kolonja B., Stanković R., Knežević D., Jovanović M., “Application of stochastic models for mine planning ...
    ... blending coals of various qualities produces the quality the customer demands. However, when the stockyard is connected with a mine (pit), it is used for homogenization of run-of-mine coal or other ore or material. In order to restrict the time necessary for homogenization activities, stockyards are divided ...
    ... for the homogenization process to be carried out. It then follows that for the contractually specified range, in deciding on the level of the pit (mine), for safety reasons that range should be decreased, particularly considering the level of data confidence and exploration of the deposit. This increases ...

  • Redesign, upgrading and unification of the drum at belt conveyors of the main mining equipment at opencast mines

    Ignjatović Dragan, Maneski Taško, Jovančić Predrag, Tanasijević Miloš (2011)

  • Zaštita od miniranja

    Suzana Lutovac, Miloš Gligorić (2024)
    Miniranje

  • Sustainable use of groundwater resources in terms of increasing the capacity of two interconnected groudwater sources: a case study Bečej (Serbia)

    Polomčić Dušan, Đekić Milan, Milosavljević Zoran, Popović Zorica, Milaković Miroslav, Ristić-Vakanjac Vesna, Krunić Olivera (2011)

  • Self-Engineering: Possibilities for Maintenance Operations in the Mining Machines Industry

    Steven Manders, Milorad Pantelić, Vladimir Milisavljević, Alberto Martinetti (2021)
    Self-engineering is a relatively new branch of knowledge that aims to understand how systems could “autonomously” re-configure or repair themselves without the intervention of the operators. A direct field of application is within the maintenance spectrum. Having systems or machines capable of self-detecting or even self-repairing could represent a game-changer, in capital asset fields such as the mining industry in particular. This paper aims to investigate the possible benefits and challenges of self-engineering / self-maintenance concerning mining machines, specifically bucket-wheel ...
    self-engineering, self-maintenance, maintenance operations, mining industry, bucket-wheel excavator, gearbox revitalization

  • Optimizacija utovarno-transportnih sistema u funkciji planiranja površinskog kopa

    Mirjana V. Banković (2018-07-13)
    Profitabilna eksploatacija sve složenijih ležišta je težak zadatak koji zavisi odtemeljnog procesa analize, planiranja i projektovanja rudnika. Izvodljiv strateškiplan mora da zadovoljava društvena, regulatorna, tehnološka, geometrijska iekonomska ograničenja. Kako bi se postigao osnovni cilj, odnosno profitabilnost iodrživost rudarskog projekta na duži period, neophodno je unapređenjematematičkih modela i informatičke podrške procesima planiranja i optimizacijekoji će omogućiti efikasnu realizaciju ovih ciljeva...
    tehnološki model, integralni model, planiranje, optimizacija,utovarno-transportni sistem, neto sadašnja vrednost projekta
    ... shovel-truck system in open pit mines. International Journal of Surface Mining, Reclamation and Environment, 6 (2), 57-59. Dagdelen, K., 1985, Optimum multi period open pit mine production scheduling. PhD Thesis, Colorado School of Mines. Dagdelen, K., 1986, Optimum open pit mine production scheduling ...
    ... EXCAVATION-TRANSPORTATION SYSTEMS IN THE SURFACE MINE PLANNING FUNCTION ABSTRACT Profitable mining of increasingly complex deposits is a difficult task that depends on the efficient analysis, planning and design of the open pit mine. A viable strategic mine plan must satisfy social, regulatory, technological ...
    ... Optimum design of open pit mines. Transactions CIM Bullitin, Vol. 58, 17-24. Li, Z., 1995, Truck-haulage economics of mining open pits by high bench. CIM bulletin, 88, 50-52. 200 Lizotte, Y., 1988, Economic and technical relations between open-pit design and equipment selection. Mine Planning and ...

  • XRD dertermination od hydrothermal phases related to epithermal mineralization in the Čukaru Peki deposit

    Dragana Bosić, Vladica Cvetković, Miodrag Banješević, Kristina Šarić (2024)
    Čukaru Peki, epithermal mineralization, hydrothermal alterations

  • Fragmentation Size Prediction of Blasted Material Using a Specialized Software for Drilling and Blasting

    Stefan Milanović, Nikola Simić, Lazar Kričak, Milanka Negovanović, Nikola Đokić, Miljan Gomilanović (2024)
    Design and optimizing the drilling and blasting parameters, should fill the requirements for the capacity, fragmentation size, and technical characteristics of loading and transport equipment, and enable a safe work at the open pit. Besides mentioned, it also achieves the minimal impact on the environment of the open pit and decreases the negative effects on the environment, especially in the blast vibration and flyrock. To obtain the best possible blasting effects and consider all the factors, a specialized software is ...
    optimization, O-Pitblast, drilling, blasting, fragmentation size

  • Geomechnical research for the new bucket wheel excavator testing at Open pit “Filijala”

    Vladimir Čebašek, Nebojša Gojković, Veljko Rupar, Miodrag Pribićević (2020)
    Since 1976 cement marl excavation at open-pit mine „Filijala” is carried out by continuous exploitation technology using bucket wheel excavator SH 400 manufactured by Orenstein und Koppel (O & K) company. Due to the bucket wheel excavator time-worn and high operating cost it was necessary to replace it with new one. In order to test the new bucket wheel excavator and prove its capacity a testing zone was defined as test block for excavation, in which the bucket wheel ...
    отпор на копање, лапорац, роторни багер

  • Fourth Summer Datathon on Linguistic Linked Open Data

    Tijana Radović, Ranka Stanković (2023)
    The 4th Summer Datathon on Linguistic Linked Open Data (SD-LLOD-22) was held in Spain, in Cersedilla near Madrid, in May 2022, and organized by the COST Action NexusLinguarum. The school gathered interested researchers, academics, students who wanted to acquire and/or expand their knowledge in the field of linguistic linked data science. During the school, a spectrum of topics from the field of linked data was presented, from various ontologies, through document integration, annotation and natural language text processing tools ...
    linguistic linked open data, sentiment analysis, linked data, RDF

  • Keyword-Based Search on Bilingual Digital Libraries

    Ranka Stanković, Cvetana Krstev, Duško Vitas, Nikola Vulović, Olivera Kitanović (2017)
    This paper outlines the main features of Biblisha, a tool that offers various possibilities of enhancing queries submitted to large collections of aligned parallel text residing in bilingual digital library. Biblishsa supports keyword queries as an intuitive way of specifying information needs. The keyword queries initiated, in Serbian or English, can be expanded, both semantically, morphologically and in other language, using different supporting monolingual and bilingual resources. Terminological and lexical resources are of various types, such as wordnets, electronic ...

  • Building Terminological Resources in an e-Learning Environment

    Ranka Stanković, Ivan Obradović, Olivera Kitanović, Ljiljana Kolonja (2012)
    ... Stanković, R., Vuković, F., Obradović, I., An Approach to Management Decision Support: The Coal Mine Pljevlja Management Information System, Proceedings of the Fifteenth International Symposium on Mine Planning and Equipment Selection, Torino, Italy, Vol. 1, pp. 436-441, 2006. [6] Krstev, C., Stankovic ...
    ... Namely, various applications developed in this area followed by the development of an information system for planning, monitoring and management of mine exploitation, indicated that such resources would greatly contribute to their functionality [5]. The only available multilingual terminological ...
    ... also already being used, among other things for the production of controlled dictionaries related to planning and management of exploitation, to mine safety protection systems, mining equipement management, human resources management systems, as well as in a business intelligence module of the ...

  • A Fuzzy Expert Model for Availability Evaluation

    Dejan Ivezić, Miloš Tanasijević, Predrag Jovančić, Radiša Đurić (2019)
    Each technical system within itself carries the great potential danger of possible occurrence of failure and damages. Mining machines are characteristic by great investment values, costs of unplanned shutdowns, complex working conditions, and environment and workers hazards. Systematic monitoring of the mining machinery is of great importance for the management of the mining companies. Availability is the overall concept of quality of service. Includes information regard to operating state, an idle state, a standby state and shut down. The ...
    raspoloživost, ekspertski sistem, fazi teorija, buldozeri
    ... bulldozers that operate to three different open pit mines in Serbia was evaluated using the proposed expert model. Machines were compared individually (selected machine at selected open pit mine), but also integral comparisons between machines and open pit mines were made. Obtain results should ...
    ... P., Optimization of operation and costs of auxiliary mechanization in order to increase the utilization of overburden and coal systems on the open cast mines of Public Enterprise "Elektroprivreda" Serbia – research study, Faculty of Mining and Geology, Belgrade, 2018 (in Serbian) ...
    ... AVAILABILITY INDICATORS A n a ly st N o . A v a il a b il it y in d ic a to r Questionnaire: Bulldozer Liebherr – Drmno Open Pit Mine Grade: Excellent Good Average Adequate Poor The degree of affiliation, % 1 R 40 60 M 100 S 100 2 R 20 80 M 100 ...

  • Optimizacija i planiranje površinskih kopova stohastičkim modelima

    Dejan R. Stevanović (2015-05-29)
    Savremeno rudarstvo izloženo je stalnom trendu pogoršanja uslova poslovanja.Mogućnost ostvarenja ekonomskih i drugih ciljeva rudarskog projektakompromitovana je stalnim pogoršanjem kvaliteta ležišta na kojima se vršieksploatacija, kao i značajnoj dozi neizvesnosti povezane sa geološkim,ekonomskim i tehničkim parametrima proizvodnje. U ovako kompleksnimuslovima poslovanja, matematički modeli sposobni da odgovore značajnimizazovima, odnosno ponude optimalna rešenja kojima se garantuje maksimalnoispunjenje projektovanih ciljeva, nameću se kao neophodnost.Trenutni, konvencionalni pristup optimizaciji i planiranju površinskih kopovazasniva se na algoritmima, razvijenim sredinom prošlog veka čije je opšteobeležje deterministički ...
    površinski kop, planiranje, optimizacija, stohastički modeli, kontrola kvaliteta uglja, neizvesnost.
    ... stohastičkim modelima;Open pit mine optimization and planning with stochastic models Dejan R. Stevanović Дигитални репозиторијум Рударско-геолошког факултета Универзитета у Београду [ДР РГФ] Optimizacija i planiranje površinskih kopova stohastičkim modelima;Open pit mine optimization and planning ...
    ... production planning on the lignite open pit. Second model that is being developed is hybrid type. It has stochastic (Monte Carlo method) and deterministic component and treats the problem of optimization of open pit boundaries. Keywords: open pit mine, planning, optimization, stochastic models ...
    ... 41–51 232 Dagdelen, K, 1985, Optimum Multi-Period Open Pit Mine Production Scheduling by Lagrangian Parameteriyation, doktorska disertacija, Colorado School of Mines, Golden, Colorado Dagdelen, K. and Johnson, T.B., l986, Optimum open pit mine production scheduling by Lagrangian parameterization ...

  • Razvoj ARCGIS geobaze površinskog kopa korišćenjem UML CASE alata

    Aleksandra Tomašević, Ljiljana Kolonja, Ivan Obradović, Ranka Stanković, Olivera Kitanović (2012)
    ... prospective open pits, model the geology and the terrain, estimate the reserves, plan the yearly production, monitor statistical data on exploitation costs, monitor the position and availability of mining equipment (excavators, conveyor belts, trucks, etc.), the state of mining objects, works on mine benches ...
    ... this paper encompass only a part of the data related to mine production, and pertain to an important segment that demands visual representation. More precisely, the paper tackles exploration works, sample analysis, infrastructure within the mine and in its environment, excavating and loading equipment ...
    ... system, and at the same time easily access alphanumeric data. The outlined solution is only the first step in creating an integral GIS system for a mine. Hence, further research in this area will focus on extension of the OpmGIS system with thematic classes related to production, integration with deposit ...

  • Application of softwares for drilling and blasting

    Stefan Milanović, Lazar Kričak, Milanka Negovanović, Nikola Simić, Jovan Marković (2019)
    U današnje vreme softveri se sve više primenjuju u rudarstvu kroz eksploataciju mineralnih sirovina, projektovanje rudnika, u obavljanju različitih operacija na terenu i sl. Među softverima za rudarstvo, postoje softveri za specifične rudarske operacije, kao što su operacije bušenja i miniranja. Ovi procesi su veoma važni u eksploataciji čvrstih mineralnih sirovina, jer predstavljaju najjeftiniji i najefikasniji oblik fragmentacije stenske mase. Kroz rad, predstavljeni su neki od softvera u kombinaciji sa modernim tehnologijama, koje se koriste širom sveta i koje ...
    softver, moderne tehnologije, miniranje, bušenje, minsko polje

  • Correlation of uniaxial compressive strength with the dynamic elastic modulus, p –wave velocity and s –wave velocity of different rock types

    Jelena Majstorović, Miloš Gligorić, Suzana Lutovac, Milanka Negovanović, Luka Crnogorac (2019)
    Knowing mechanical properties of rocks incorporated with ultrasonic waves velocities investigations provide a secure basis for mine modelling. Uniaxial compressive strength, dynamic elastic modulus and ultrasonic waves velocities are just some of the rock properties that indicate on presence of discontinuities, stratification and fissures of rocks. Determining the relationship of these rock properties testing the rock samples that are corresponding to different rock types extracted from different mineral deposits represents the core of this study. In this paper, we ...
    линеарна регресија, метода најмањих квадрата, динамички модул еластиности, брзина уздужних таласа

  • Estimating hydraulic parameters for the complex hydrodynamic models

    Dušan Polomčić, Dragoljub Bajić, Jelena Ratković, Bojan Hajdin (2018)
    Hydrodynamic models have usually been calibrated manually, by trial-and-error, with different values of hydraulic parameters and hydraulic characteristics of boundary conditions. This method of calibration and estimation of hydraulic parameters requires an extensive knowledge and experience of experts, but whether the resulting solution includes an optimal set of parameters still remains an open question. An optimization method founded upon the Gauss-Marquardt-Levenberg algorithm, along with PEST software based on that algorithm, introduces automation of model calibration with regularization, which substantially ...
    kalibracija, optimizacija, PEST, koeficijent filtracije

  • Transformer-Based Composite Language Models for Text Evaluation and Classification

    Mihailo Škorić, Miloš Utvić, Ranka Stanković (2023)
    Parallel natural language processing systems were previously successfully tested on the tasks of part-of-speech tagging and authorship attribution through mini-language modeling, for which they achieved significantly better results than independent methods in the cases of seven European languages. The aim of this paper is to present the advantages of using composite language models in the processing and evaluation of texts written in arbitrary highly inflective and morphology-rich natural language, particularly Serbian. A perplexity-based dataset, the main asset for the ...
    General Mathematics, Engineering (miscellaneous), Computer Science (miscellaneous)

  • Model za optimizaciju graničnog saržaja metala u rudi u funkciji dugoročnog planiranja površinskih kopova

    Daniel P. Kržanović (2016-06-14)
    Optimizacija graničnog sadržaja metala u rudi jedan je od osnovnih koraka u planiranju i dizajniranju površinskih kopova i ima za cilj postizanje maksimalne neto sadašnje vrednosti (NPV). Iz tog razloga, optimizacija graničnog sadržaja i danas je predmet mnogih istraživanja u rudarskoj nauci, sa ciljem rešavanja praktičnih problema u eksploataciji ležišta.Dugoročno planiranje eksploatacije na površinskim kopovima podrazumeva sagledavanje svih relevantih parametara i faktora (geologije rudnog ležišta, tehnologije proizvodnog procesa, kapaciteta otkopavanja i prerade, troškova, cena metala, iskorišćenja i dr) kako ...
    površinski kop, dugoročno planiranje, optimizacija graničnog sadržaja, maksimizacija neto sadašnje vrednosti (NPV).
    ... W., Kuchta, M., 1995, Open pit mine planning and design, Balkema, Rottherdam, pp. 427-442. Hustrulid, W., Kuchta, M., 1998, Open Pit Mine Planning and Design, A.A. Balkema, Rotterdam, Netherlands, vol. 1, ISBN 9054101814. Hustrulid, W., Kuchta, M., 2006, Open Pit Mine Planning and Design – Volume ...
    ... Profitability Sensitivity Analysis of a Mining Venture, Mine Evaluation Seminar at the University of Minesota. Bernabe, D., Dagdelen, K., 2002, Comparative analysis of open pit mine scheduling techniques for strategic mine planning of TINTAYA copper mine in Peru, SME Annual Meeting. Berry, E.S., 1922 ...
    ... Caccetta, L., Hill, S.P., 2003, An Application of Branch and Cut to Open Pit Mine Scheduling,. Journal of Global Optimization, vol. 27, pp. 349 – 365. Caccetta, L., Hill, S.P., 1999, Optimization Techniques For Open Pit Mine Scheduling, School of Mathematics and Statistic, Curtin University of ...