Претрага

Упит dcterms_subject_txt: MICP process

481 items

  • Comprehensive Profiling of Microbiologically Induced CaCO3 Precipitation by Ureolytic Bacillus Isolates from Alkaline Soils

    Olja Šovljanski, Lato Pezo, Jovana Stanojev, Branimir Bajac, Sabina Kovač, Elvira Tóth, Ivan Ristić, Ana Tomić, Aleksandra Ranitović, Dragoljub Cvetković, Siniša Markov (2021)
    MICP process, kinetic study, calcite, vaterite, MALDI-TOF identification, Bacillus licheniformis, Sporosarcina pasteurii
    ... bacteria type is based on metabolic activities involved in the MICP process. Whether the metabolic pathway is autotrophic (induction of local CO2 reduction) or heterotrophic (lead to active and passive CaCO3 formation), the MICP process is a consequence of carbonate production by ion transport across ...
    ... bacterial isolates from sabkhas. 3.3. Examination of Metabolic Activities Relevant to the MICP Process Different physiological and ecological tests might be important for understanding behavior during the MICP process [40]. Due to this hypothesis, bacterial growth in oxygen- free conditions, salts tolerance ...
    ... formation in the MICP engineering application is significant because re- sistant life forms can survive extreme MICP conditions such as high alkalinity, lower water availability, etc. [43]. In this sense, ensuring sufficient spore concentration should be required for an effective MICP process. Zhang et al ...

  • Available technological procedures for capturing CO2 in the industrial and power generation sectors

    Lola Tomić, Vesna Karović Maričić, Dušan Danilović, Branko Leković, Miroslav Crnogorac (2021)
    Climate change is a major environmental issue caused by anthropogenic emissions of greenhouse gases. Capturing CO2 and storing it in suitable geological formations is one of the main technological solutions that can provide mitigation of CO2 emission into the atmosphere. Capturing CO2 represents the first phase in process of carbon capture and storage, and includes the application of various technologies for the separation of CO2 produced in the energy and industrial sectors. There are four main systems for capturing ...
    capturing CO2, power plants, CO2 capture systems, CO2 technologies
    ... Selexol (dimethylether of polyethylene glycol), Resticol process (methanol), Fluor process (propylene carbonate), Purisol (N-methyl pyrrolidone) and Morphysorb process (morpholine) [20-22]. The most important advantage of physical absorption process is relatively low capital and operating cost, and use ...
    ... are: technology is relatively simple, process can be carried out at atmospheric pressure, and there is no chemical solvents or other components [11,23,31]. The major disadvantage of this process is that large amount of energy is required to provide the cooling process [11]. Also, one of disadvantage is ...
    ... such as: capturing from industrial process stream, capturing after combustion, capturing before combustion and capturing CO2 by oxy-fuel (Figure 1). Figure 1. Simplified illustration of the main carbon capture processes [6] 2.1. Capturing from industrial process stream Industrial processes are ...

  • Application of MCDA in the determination of optimal block size for open-pit modelling and mine planning

    Petar Marković, Dejan Stevanović, Milica Pešić Georgiadis, Mirjana Banković (2021)
    The process of creating a geological block model as the basis for a further detailed design and planning of mining operations is a very responsible task. Errors made during this initial process are transferred to all other phases of the mining project. Certainly, one of the most important decisions for the modelling process is the choice of the appropriate size of the blocks that form the model itself. The determination of the optimal block size is not a simple ...
    dimenzije minibloka, višekriterijumska analiza, AHP, modeliranje ležišta, planiranje na površinskim kopovima

  • Development of the hybrid MCDM model for evaluating and selecting bucket wheel excavators for the modernization process

    Snezana Savkovic, Predrag Jovancic, Stevan Djenadic, Milos Tanasijevic, Filip Miletic (2022)
    This paper presents a methodology for evaluating and ranking different bucket wheel excavators (BWE) for determining which machine should enter in the process of revitalization and modernization. Various multicriteria methods are used. Combining them achieves the best effect when choosing BVE for the modernization process. AHP, TOPSIS, VIKOR, and PROMETHEE methods are used. The hybrid models are developed from the multi-criteria decision making (MCDM) methods and they are used to evaluate the basic indicators that characterize the operation of ...
    višekriterijumsko odlučivanje, rotorni bageri, modernizacija, ekspertska analiza

  • Valorization of non-balanced coal reserves in Serbia for underground coal gasification

    David Petrović, Lazar Kričak, Milanka Negovanović, Stefan Milanović, Jovan Marković, Nikola Simić, Ljubisav Stamenić (2019)
    In the name of a better and safer energy future, it is our responsibility to focus our knowledge and activities to save on imported liquid and gas fossil fuels, as well as coal on which energy security of Serbia is based. The rationalization in the use of available energy resources certainly positively affects economy and the environment of a country. This paper indicates motivations for the application of the underground coal gasification process, as well as surface gasification for ...
    ugalj, gasifikacija, zaštita životne sredine, skladištenje, solarna
    ... about 7-8 kg of steam per m? of O». If only oxygen is used, the calorific value ofthe gas from such UCG process would be 2-2.5 times higher than that of air gasification [2]. Analyzing UCG process as a way of obtaining a suitable and useful energy source, some of the advantages are: — the absence ...
    ... depends on many influential parameters related to drilling options, geological characteristics and coal quality. Technological process of UCG The technological process of UCG involves the preparation of a coal gasification layer and consists of drilling vertical wells or boreholes that follow the ...
    ... from coal. The cost of such generated diesel fuel was about 928 per barrel, which included entire production process from coal, to gas and the oil at the end. Twenty years ago the UCG process was exploited in only 6-7 countries in the World. Today there are more than 40 countries which is dealing ...

  • Steel Arch Support Deformations Forecast Model Based on Grey–Stochastic Simulation and Autoregressive Process

    Luka Crnogorac, Suzana Lutovac, Rade Tokalić, Miloš Gligorić, Zoran Gligorić (2023)
    Relatively large deformations of the steel arch support in underground coal mines in the Republic of Serbia present one of the main problems for achieving the planned production of coal. Monitoring of the critical sections of the steel arch support in the underground roadways is necessary to gather quality data for the development of a forecasting model. With a new generation of 3D laser scanners that can be used in potentially explosive environments (ATEX), deformation monitoring is facilitated, while ...
    čelična podgrada, prognoza deformacija, vremenske serije, grey-stohastička simulacija, autoregresija, podzemni rudnik uglja

  • Analysis Of the Process Of Carbon Capture Utilization And Storage In Underground Reservoirs

    John Nyame (2024)
    The importance of mitigating the effects of global climate change has necessitated an in-depth exploration of innovative strategies to reduce carbon dioxide (CO2) emissions. Among these strategies, Carbon Capture, Utilization, and Storage (CCUS) has emerged as a promising and transformative solution. This master thesis delves into the diverse realm of CCUS processes, aiming to unravel the positives challenges, and opportunities within this dynamic field. The analysis begins with a systematic examination of carbon capture technologies, encompassing post-combustion, pre-combustion, and oxy-fuel combustion ...
    Carbon Capture, Utilization and Storage
    ... gas fields in the Norwegian sector of the North Sea [97]. The process selected for capturing the CO> was the use of the absorption process. This is a well-established process for this purpose, but it was the first time for the process to be packed together on an offshore platform. It consists of ...
    ... Capture and Storage Process [7] Capture . _ Transport Utilization/Storage CCUS Facility . CO, Sources Oil/gas Prođuction imcreaxe Figure 1.3 A full scale ofa Carbon Capture, Utilization and Storage process 2. CARBON CAPTURE ANALYSIS Carbon capture is the process of trapping carbon dioxide ...
    ... practical performances and process considerations[34]. Moreover, cycle design, configuration, and optimization of any cyclic process should take into account the characteristics of the specific adsorbent to be eventually used.[35]. Figure 2.3 indicates the adsorbent technique process used to capture CO- ...

  • Testing the energy value of different types of coal by the method of active thermography

    Stevan Đenadić, Ljubiša Tomić, Vesna Damnjanović, Predrag Jovančić, Dragutin Jovković (2020)
    In this paper, coal thermograms are presented and analyzed in order to determine their energy value. Two types of coal of different categories, brown and lignite, were selected for active thermographic imaging. The tested coal samples were processed before measurement so that they are similar in dimensions and have two plane-parallel smooth surfaces. The test samples were "primarily" heated under the same conditions and the process of their cooling was monitored by a thermal camera. "Then" they were cooled ...
    Infrared imaging, nondestructive testing, active thermography, coal.

  • Novel Methods in Multiple Criteria Decision-Making Process (MCRAT and RAPS)—Application in the Mining Industry

    Katarina Urošević, Zoran Gligorić, Igor MIljanović, Čedomir Beljić, Miloš Gligorić (2021)
    Multiple criteria decision making (MCDM) is a supporting tool which is widely spread in different areas of science and industry. Many researchers have confirmed that MCDM methods can be useful for selecting the best solution in many different problems. In this paper, two novel methods are presented and applied on existing decision-making processes in the mining industry. The first method is multiple criteria ranking by alternative trace (MCRAT) and the second is ranking alternatives by perimeter similarity (RAPS). These ...
    višekriterijumsko odlučivanje, nove metode, rudarstvo, šeme miniranja

  • Environmental Risks to Air, Water and Soil Due to the Coal Mining Process

    Ristović Ivica (2011)

  • Image analiyis of browning process in pesto spreads

    Lato Pezo, Mirjana Pavlović, Sanja Ostojić, Snežana Zlatanović, Ilić Marija, Jasna Gvozdenović (2011)

  • Effect of pulp solid phase content alteration on “Lisina” phosphate flotation process

    Radulović Dragan, Vučinić Dušica, Branislav Ivošević, Zorica Lopičić (2012)

  • INVENTS: A Hybrid Mine Ventilation Planning and Design System

    Lilić Nikola, Stanković Ranka, Obradović Ivan (2013)
    Ventilation system analysis is a complex process based on the calculation and analysis of numerous parameters. These problems can be successfully solved by the SimVent numerical package, but a full understanding and use of the obtained results require the involvement of an experienced specialist in the ventilation field. The solution was found in the creation of a hybrid system INVENTS, whose knowledge base represents a formalization of the expert knowledge in the mine ventilation field. In this paper we ...
    hybrid systems, mine ventilation, expert systems
    ... System planing is an introduction to the mine design process. In the planning process key relations are defined that have to be taken into account in the mine design phase. The initial step in the mine ventilation planing and design process is the establishment of a basic or initial network and ...
    ... network. The ventilation design process has to continue throughout the construction of the mine ventilation system as well as its maintenance, in order to secure the highest possible level of system use and effectiveness. The final phase in the outlined design process is state evaluation and modification ...
    ... Belgrade 2 Bsc, Faculty of Mining and Geology, University of Belgrade, Djusina 7, 11.000 Belgrade Abstract: Ventilation system analysis is a complex process based on the calculation and analysis of numerous parameters. These problems can be successfully solved by the SimVent numerical package, but a full ...

  • INVENTS: a hybrid system for subsurface ventilation analysis

    Nikola Lilić, Ranka Stanković, Ivan Obradović (2000)
    Ventilation system analysis is a complex process based on the calculation and analysis of numerous parameters. These problems can be successfully solved by the SimVent numerical package, but a full understanding and use of the obtained results require the involvement of an experienced specialist in the ventilation field. The solution was found in the creation of a hybrid system INVENTS, whose knowledge base represents a formalization of the expert knowledge in the mine ventilation field. In this paper we ...
    ... System planing is an introduction to the mine design process. In the planning process key relations are defined that have to be taken into account in the mine design phase. The initial step in the mine ventilation planing and design process is the establishment of a basic or initial network and ...
    ... network. The ventilation design process has to continue throughout the construction of the mine ventilation system as well as its maintenance, in order to secure the highest possible level of system use and effectiveness. The final phase in the outlined design process is state evaluation and modification ...
    ... Belgrade 2 Bsc, Faculty of Mining and Geology, University of Belgrade, Djusina 7, 11.000 Belgrade Abstract: Ventilation system analysis is a complex process based on the calculation and analysis of numerous parameters. These problems can be successfully solved by the SimVent numerical package, but a full ...

  • Effect of operating parameters on the mechanical activation process of mica powder

    Andrić Ljubiša, Aćimović-Pavlović Zagorka, Trumić Milan, Kostović Milena, Ćalić Nadežda (2012)

  • Towards more sustainable district heating systems in Serbia - Options and obstacles

    Marija Živković, Boban Pavlović, Dejan Ivezić, Miloš Tanasijević, Dejan Stojanović (2024)
    The major share of energy consumed in the building environment is dedicated to meeting heating needs, which makes this sector one of the key players in the transformation of the whole energy system. The accurate approach to the transition process assumes acting on both the demand and supply sides. Lately, the supply side has received more attention, as its transformation is one of the key steps of the energy transition process. District heating systems are recognized as substantial contributors ...
    energetska tranzicija, daljinsko grejanje, dekarbonizacija, obnovljivi izvori energije, prepreke, Srbija

  • To what extent reactivated faults are (not) responsible for karst process: example from Serbian Carpatho-Balkanides?

    Ana Mladenović, Jelena Ćalić (2023)
    Carpatho-Balkanides represent part of the complex Dinaric – Carpatho – Balkan orogenic system, that geomorphologically dominates the central part of the Balkan Peninsula. The existence of this orogenic system is a result of closure of the Neotethys ocean and subsequent convergence of the Adriatic microplate and the Eurasian continent, that has been still active in the recent times. Such geodynamic characteristics conditioned complex tectonic structures, multiply reactivated during Late Cretaceous and Cenozoic times. The main aim of this work ...
    Carpatho-Balkanides, karst caves, reactivated faults, transpressional tectonics

  • Vibration as deciding parameter during revitalization process for replacing the bucket wheel drive

    Bošković Saša, Jovančić Predrag, Ignjatović Dragan, Rakićević Branislav, Maneski Taško (2015)

  • Biogenesis of secondary mycogenic minerals related to wall paintings deterioration process.

    Nikola Unković, Suzana Erić, Kristina Šarić, Miloš Stupar, Žaljko Savković, Slaviša Stanković, Olja Stanojević, Ivica Dimkić, Jelena Vukojević, Milica Ljaljević Grbić (2017)

  • The influence of process parameters on the structure and properties of mica mechanically activated in an ultra centrifugal mill

    Andrić Ljubiša, Aćimović-Pavlović Zagorka, Trumić Milan, Kostović Milena (2012)